Edgar Filing: PRO DEX INC

Amended Annual Report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 10-K/A No. 2


þ	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended June 30, 2017


¨	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES ACT OF 1934

For the transition period from ____________ to ____________

Commission File Number: 000-14942

PRO-DEX, INC.

(Exact name of registrant as specified in its charter)


Colorado	84-1261240
(State or Other Jurisdiction of Incorporation or Organization)	(I.R.S. Employer Identification No.)

2361 McGaw Avenue, Irvine, CA	92614
(Address of Principal Executive Offices)	(Zip Code)

(949) 769-3200

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:



Title of each class	Name of each exchange on which registered
Common Stock, no par value	NASDAQ Capital Market

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¨ No þ

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes þ No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company (as defined in Rule 12b-2 of the Exchange Act).


Large accelerated filer ¨		Accelerated filer ¨
Non-accelerated filer ¨	(Do not check if a smaller reporting company)	Smaller reporting company þ
		Emerging growth company ¨

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No þ

As of December 31, 2016, the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the closing sales price on the Nasdaq Capital Market was approximately $10.8 million. For the purpose of this calculation shares owned by officers, directors and 10% stockholders known to the registrant have been deemed to be owned by affiliates. This calculation does not reflect a determination that persons are affiliates for any other purposes.

As of September 1, 2017, 4,193,791 shares of the registrant’s no par value common stock were outstanding.

Documents incorporated by reference:

Part III of this report incorporates by reference certain information from the registrant’s definitive proxy statement (the “Proxy Statement”) for its 2017 Annual Meeting of Shareholders. The Proxy Statement will be filed with the U.S. Securities and Exchange Commission within 120 days after the end of the fiscal year to which this report relates.

EXPLANATORY NOTE – AMENDMENT

Pro-Dex, Inc. (the “Company”) is filing this Amendment No. 2 on Form 10-K/A (this “Amendment”) to the Company’s annual report on Form 10-K for the fiscal year ended June 30, 2017, filed with the Securities and Exchange Commission on September 14, 2017 (the “Original Filing Date”), as amended by Amendment No. 1 on Form 10-K/A filed with the Securities and Exchange Commission on March 23, 2018 (as amended, the “Form 10-K”), to provide updated and complete version of Exhibit 31.1 and 31.2.

No other changes have been made to the Form 10-K. This Amendment speaks as of the Original Filing Date of the Form 10-K, does not reflect events that may have occurred subsequent to the Original Filing Date and, except as expressly described in the immediately preceding paragraph, does not modify or update in any way the disclosures made in the Form 10-K.

PRO-DEX, INC.

FORM 10-K

FOR THE FISCAL YEAR ENDED JUNE 30, 2017

TABLE OF CONTENTS


		PAGE

PART I

ITEM 1.	BUSINESS	1
ITEM 1A.	RISK FACTORS	6
ITEM 1B.	UNRESOLVED STAFF COMMENTS	11
ITEM 2.	PROPERTIES	11
ITEM 3.	LEGAL PROCEEDINGS	11
ITEM 4.	MINE SAFETY DISCLOSURES	11

PART II

ITEM 5.	MARKET FOR REGISTRANT’S COMMON EQUITY-RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES	12
ITEM 6.	SELECTED FINANCIAL DATA	12
ITEM 7.	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS	13
ITEM 7A.	QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK	21
ITEM 8.	FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA	22
ITEM 9.	CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE	47
ITEM 9A.	CONTROLS AND PROCEDURES	47
ITEM 9B.	OTHER INFORMATION	47

PART III


ITEM 10.	DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE	48
ITEM 11.	EXECUTIVE COMPENSATION	48
ITEM 12.	SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS	48
ITEM 13.	CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE	48
ITEM 14.	PRINCIPAL ACCOUNTING FEES AND SERVICES	48

PART IV

ITEM 15.	EXHIBITS, FINANCIAL STATEMENT SCHEDULES	49

PART I

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This report contains forward-looking statements within the meaning of federal securities laws. Forward-looking statements are not based on historical facts but instead reflect the Company’s expectations, estimates or projections concerning future results or events. These statements generally can be identified by the use of forward-looking words or phrases such as “believe,” “expect,” “anticipate,” “may,” “could,” “intend,” “intent,” “belief,” “estimate,” “project,” “forecast,” “plan,” “likely,” “will,” “should” or similar words or phrases. These statements are not guarantees of performance and are inherently subject to known and unknown risks, uncertainties and assumptions that are difficult to predict and could cause actual results, performance or achievements to differ materially from those expressed or indicated by those statements. The Company cannot assure you that any of its expectations, estimates or projections will be achieved.

Forward-looking statements included in this report are only made as of the date of this report and the Company disclaims any obligation to publicly update any forward-looking statement to reflect subsequent events or circumstances.

Numerous factors could cause the Company’s actual results and events to differ materially from those expressed or implied by forward-looking statements, including, without limitation: loss of a significant customer, entry of new and stronger competitors, capital availability, unexpected costs, compliance with contractual obligations, failure to capitalize upon access to new customers, marketplace delisting, the ramifications of industry consolidation of medical products manufacturers, dealers and distributors, managed health care, market acceptance and support of new products, cancellation of existing contracts, customer “in house” production of products previously designed by and/or acquired from the Company, maintaining favorable supplier relationships, the Company’s ability to engage qualified human resources as needed, regulatory compliance, general economic conditions and other factors described under Item 1A (Risk Factors) of this report. This list of factors is illustrative, but by no means exhaustive. All forward-looking statements should be evaluated with the understanding of their inherent uncertainty.

ITEM 1.

BUSINESS

Company Overview

Pro-Dex, Inc. (“Company”, “Pro-Dex”, “we”, “our”, “us”) specializes in the design, development and manufacture of powered rotary drive surgical and dental instruments used primarily in the orthopedic, spine, maxocranial facial and dental markets. Our Fineline Molds division, acquired in fiscal 2015, manufactures plastic injection molding for a variety of industries. Pro-Dex's products are found in hospitals, dental offices, and medical engineering labs around the world.

Through January, 2017, we also designed and manufactured multi-axis motion control systems used in factory automation and scientific research markets and these products can be found in scientific research facilities and high tech manufacturing operations around the world. We sold certain of the assets and the business operations of our OMS division located in Beaverton Oregon to our long time general manager of the division. This division has been classified as a discontinued operation in conformity with applicable accounting guidance and the assets that were sold have been reclassified as assets held for sale on our consolidated balance sheet as of June 30, 2016. Accordingly, unless otherwise indicated, OMS’s results have been reported as discontinued operations and removed from all financial discussions of continuing operations. (See Note 3 to the Consolidated Financial Statements contained elsewhere in this report).

Through April, 2017, we provided engineering consulting and placement services, as well as quality and regulatory consulting services through our Engineering Services Division. Although we continue to provide engineering, quality and regulatory consulting services to our customers, we have ceased placement services and accordingly have disbanded our Engineering Services Division. The cessation of placement services is not expected to have a material impact on our financial position or results of operations.

In fiscal 2015, we acquired Huber Precision (“Huber”), a business that made custom machined parts. We made the investment to garner a wider customer base, but the sales to the customers that were serviced by Huber dwindled over time, such that activities have become immaterial. As a result the intangibles relating to Huber were impaired during the first quarter of fiscal 2017.

Our principal headquarters are located at 2361 McGaw Avenue, Irvine, California 92614 and our phone number is 949-769-3200. Our Internet address is www.pro-dex.com. Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, amendments to those reports and certain other Securities and Exchange Commission (“SEC”) filings, are available free of charge through our website as soon as reasonably practicable after such reports are electronically filed with, or furnished to, the SEC. In addition, our Code of Ethics and other corporate governance documents may be found on our website at the Internet address set forth above. Our filings with the SEC may also be read and copied at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC at www.sec.gov and company specific information at www.sec.gov/edgar/searchedgar/companysearch.html.

During fiscal 2015, we obtained title to an industrial property located in Ramsey, Minnesota (the “Ramsey Property”) and extended financing to a company, Riverside Manufacturing, Inc. (“Riverside”), that operated out of the Ramsey Property. Our investment was made through our limited liability company, Pro-Dex Sunfish Lake, LLC to achieve a return on capital upon liquidation or upon foreclosure of the Riverside assets. The investments in the Ramsey Property and Riverside assets were sold during fiscal 2016. (See Note 8 to the Consolidated Financial Statements contained elsewhere in this report for additional information concerning this investment.)

All years relating to financial data herein shall refer to fiscal years ended June 30, unless indicated otherwise.

Description of Business

The majority of our revenue is derived from designing, developing and manufacturing surgical devices for the medical device and dental industries. The proportion of total sales by type is as follows (in thousands, except percentages):


	Years Ended June 30,
	2017					2016
	(In thousands)
			% of Revenue					% of Revenue
Medical device and services	$	18,584		85	%	$	14,292		75	%
Industrial and scientific		882		4	%		857		4	%
Dental and component		786		4	%		1,176		6	%
Repairs		302		1	%		809		4	%
Other		1,389		6	%		2,055		11	%
Total Sales	$	21,943		100	%	$	19,189		100	%

Our medical device products utilize proprietary designs developed by us primarily under exclusive development and supply agreements and are manufactured in our Irvine, California facility, as are our dental products. Our medical device products are sold primarily to original equipment manufacturers and our dental products are sold primarily to dental product distributors. In our San Dimas, California facility we manufacture plastic injection molds for a wide variety of industries. The proportion of total sales by facility is as follows:


	Years Ended June 30,
	2017					2016
	(In thousands)
			% of Revenue					% of Revenue
Irvine	$	20,987		96	%	$	17,888		93	%
San Dimas		956		4	%		1,301		7	%
Total Sales	$	21,943		100	%	$	19,189		100	%

In fiscal year 2017, our top 20 customers accounted for 94% of our sales compared to 92% in fiscal year 2016. In fiscal 2017, we had one customer, included in medical device revenue above, that accounted for 50% of sales with our next largest customer accounting for 7% of sales. This compares to fiscal year 2016, when we had three customers, all included in medical device revenue above, that each provided more than 10% of our revenue, cumulatively totaling 59% of sales. In many cases, including our largest customers, disclosure of customer names is prohibited by confidentiality agreements with such entities. We have no plans to discontinue the sales relationships with our existing significant customers. Our largest customer in fiscal 2015 and previous years replaced a primary product that we sold to them with one that they now manufacture. Therefore, although we continued to have sales to this customer in fiscal 2017, we expect revenue to this customer to continue to decline. This customer accounted for $1.5 million or 7% of revenue in fiscal 2017, $3.6 million or 19% of revenue in fiscal 2016 and $6.6 million or 55% of revenue in fiscal 2015.

Our business today is almost entirely driven by sales of our medical devices. Many of our significant customers place purchase orders for specific products that were developed under various development and/or supply agreements. Our customers may request that we design and manufacture a custom surgical device or they may hire us as a contract manufacturer to manufacture a product of their own design. In either case, we have extensive experience with autoclavable, battery-powered and electric, multi-function surgical drivers and shavers. We continue to focus a significant percentage of our time and resources on providing outstanding products and service to our valued principal customers. Additionally, in the current fiscal year we have realized measurable cost reductions due to our investment in machinery and equipment.

Simultaneously, we are working to build top-line sales through active proposals of new medical device products with new and existing customers, and completed a significant engineering project during the third quarter of fiscal 2017. Our patented adaptive torque-limiting has been very well received in the CMF market and we therefore anticipate continued investment in this area with research and development focused on applying this technology to other surgical applications. Additionally, in April 2017 we invested in Monogram Orthopaedics Inc. (“Monogram”), a medical device start-up specializing in precision, patient specific orthopedic implants. In conjunction with making the loan to Monogram, we were granted the exclusive right to develop, engineer, manufacture and supply certain products on behalf of Monogram. We are hopeful that this investment will generate future revenue streams as contemplated by planned future definitive development and supply agreements. However, we believe that this is a long-term, strategic investment which will likely take several years to cultivate and generate meaningful additional revenue, if at all.

The majority of the raw materials and components used to manufacture our products are purchased and are available from several sources, including through our own in-house machining capabilities. Portescap Danaher, K-V Engineering, and Fischer Connectors are examples of key suppliers. We have no exclusive arrangements with any of our suppliers, but in several instances only one supplier is used for certain high-value components. In most of such instances, secondary suppliers have been identified, although it is likely that any transition to a new or different supplier would result in a delay in the supply chain. We consider our relationships with our suppliers and manufacturers to be good. We do not intend to terminate any such relationship at this time, nor does management have knowledge that any supplier or manufacturer intends to terminate its relationship with us.

Our commitment to product design, manufacturing and quality systems are supported by our compliance with several regulatory agency requirements and standards. We hold a U.S. Food and Drug Administration (“FDA”) Establishment Registration and a State of California Device Manufacturing License (Department of Public Health Food and Drug Branch) with respect to our Irvine, California facility. In addition, our Irvine, California facility is certified to ISO 13485:2003, Medical Device Directive 93/42/EEC – Annex II, and Canadian Medical Device Conformity Assessment System.

At June 30, 2017, we had a backlog of $8.7 million compared with a backlog of $11.3 million at June 30, 2016. We have experienced, and may continue to experience, variability in our new order bookings due to, among other reasons, the launch of new products, the timing of customer orders based on end-user demand and customer inventory levels. We do not typically experience seasonal fluctuations in our shipments and revenues.

Segments

With the sale of the OMS division this fiscal year and the conscious decision to cease the placement services through our Engineering Services Division, we no longer have reportable segments. The OMS division was historically the only division that was significant enough to require segment disclosures and as such, effective with this divestiture, we no longer require segment disclosure as our business is currently run.

Competition

The markets for products in the industries served by our customers are intensely competitive, and we face significant competition from a number of different sources. Several of our competitors have significantly greater name recognition, as well as substantially greater financial, technical, product development and marketing resources, than us.

We compete in all of our markets with other major medical device companies. As a provider of outsourced services, we also compete with our customers’ own internal development and manufacturing groups. Competitive pressures and other factors, such as new product or new technology introductions by us, our customers’ internal development and manufacturing departments, or our competitors, may result in price or market share erosion that could have a material adverse effect on our business, results of operations and financial condition. Also, there can be no assurance that our products and services will achieve broad market acceptance or will successfully compete with other products targeting the same customers.

Research and Development

We conduct research and development activities to both maintain and improve our market position. Our research and development effort involves the design and manufacture of products that perform specific applications for our existing and prospective customers. Our research and development activities are focused on:


	·	expanding our knowledge base in the medical device industry to solidify our products with current customers and expand our customer base;
	·	advancing applicable technologies; and
	·	enhancing our product lines.

In certain instances we may share research and development costs with our customers by billing for non-recurring engineering services. Revenue recognized for non-recurring engineering services represented 4% and 6% of our revenue in fiscal year 2017 and 2016, respectively. During recent years, we have entered into certain development and supply contracts, the development portions of which provide for billable non-recurring engineering service fees. Such fees are recognized as revenue generally upon successful completion of the non-recurring engineering services. During fiscal 2017, we completed the development of a surgical handpiece for a customer and began shipping products to this customer. Revenue for this development contract was recorded under the milestone completion method and we recognized revenue of $752,000 and $367,000 during fiscal 2017 and 2016, respectively. During the second quarter of fiscal 2016 we completed the development portion of a contract entered into during fiscal 2013 allowing us to record approximately $660,000 in non-recurring engineering service revenue, also included in medical device and services revenue. We will continue to pursue other revenue-generating development projects. Accordingly, we believe that non-recurring engineering fees could represent a greater share of our revenue in the future, but there can be no assurance that we will be successful in these endeavors.

During each of the fiscal years ended June 30, 2017 and 2016, we incurred research and development expenses amounting to $1.2 million, which costs exclude labor and related expenses of $247,000 and $412,000 in fiscal 2017 and 2016 respectively, that were shared with our customers through billings for non-recurring engineering services.

Employees

At June 30, 2017, we had 76 employees comprised of 70 employees in Irvine, California and 6 in San Dimas, California as well as 5 temporary employees working in Irvine, California. At June 30, 2016, we had 76 full-time employees comprised of 60 employees in Irvine, California 9 in Beaverton, Oregon 6 in San Dimas, California and 1 in Boston, Massachusetts, as well as 28 temporary employees, 16 of whom were working on an ESD contract in New Jersey and the balance were working in Irvine, California. None of our employees are a party to any collective bargaining agreements with us. We consider our relationships with our employees to be good.

Government Regulations

The manufacture and distribution of medical and dental devices are subject to state and federal requirements set forth by various agencies, including the FDA, and state medical and dental boards. The statutes, regulations, administrative orders, and advisories that affect our businesses are complex and subject to diverse, often conflicting, interpretations. While we make every effort to maintain full compliance with all applicable laws and regulations, we are unable to eliminate the ongoing risk that one or more of our activities or devices may at some point be determined to be non-compliant. The penalties for non-compliance could range from an administrative warning to termination of a portion of our business. Furthermore, even if we are subsequently determined to have fully complied with applicable laws or regulations, the costs to achieve such a determination and the intervening loss of business could adversely affect or result in the cessation of a portion of our business. A change in such laws or regulations at any time may have an adverse effect on our operations.

The FDA designates all medical devices into one of three classes (Class I, II or III) based on the level of control necessary to assure the safety and effectiveness of the device (with Class I requiring the lowest level of control and Class III requiring the greatest level of control). The surgical instrumentation we manufacture is generally classified into Class I, and our dental instrumentation is generally classified into Class II. The FDA has broad enforcement powers to recall and prohibit the sale of products that do not comply with federal regulations, and to order the cessation of non-compliant processes. No claim has been made to date by the FDA regarding any of our products or processes. Nevertheless, as is common in the industry, certain of our products and processes have been the subject of routine governmental reviews and investigations.

The total cost of providing health care services has been and will continue to be subject to review by governmental agencies and legislative bodies in the major world markets, including the United States, which are faced with significant pressure to lower health care costs. The Patient Protection and Affordable Care Act signed into law in March 2010 (the “Affordable Care Act”) imposes a 2.3% excise tax, currently suspended until December 31, 2017, on sales of certain medical devices, some of which we produce, that we may be unable to recover through price increases to our customers.

We believe that our business is conducted in a manner consistent with Environmental Protection Agency (“EPA”) and other agency regulations governing disposition of industrial waste materials.

While we believe that our products and processes fully comply with applicable laws and regulations, we are unable to predict the outcome of any investigation or review which may be undertaken in the future with respect to our products or processes.

Management believes that each of our facilities has manufacturing systems and processes that are based on established Quality Management System standards. In addition, we believe that our Irvine, California facility is compliant with applicable Good Manufacturing Practices promulgated by the FDA, and is compliant with applicable ISO standards set forth by the International Organization for Standardization.

Patents, Trademarks and Licensing Agreements

We hold patents relating to miniature rotary drive products and torque-limiting screwdrivers. Our patents have varying expiration dates. The near term expiration of the patents, if any, is not expected to cause any change in our revenue-generating operations as the revenue from the products associated with those patents is not material.

We have no reason to believe that our activities infringe upon the intellectual property of any third party. With respect to our own patents, we have no reason to believe that our patents are invalid and we believe that at least some of our patents cover certain aspects of our products. While we are unaware of any reason that would cause us to assert or defend a claim of patent infringement, any such assertion or defense could materially and adversely affect our business and results of operations due to the costs involved.

We have certain federally registered trademarks relating to our products, including Pro-Dex^® along with a number of other common law trademarks.

We have not entered into any franchising agreements. We have not granted nor do we hold any third-party licenses having terms under which we earn revenue or incur expense in material amounts.

ITEM 1A.

RISK FACTORS

Investing in our common stock involves a high degree of risk. You should carefully consider the following risk factors, as well as the other information contained in this report, before deciding whether to invest in shares of our common stock. If any of the following risks actually occur, our business, financial condition, operating results and prospects would suffer. In that case, the trading price of our common stock would likely decline and you might lose all or part of your investment in our common stock. The risks described below are not the only ones we face. Additional risks that we currently do not know about or that we currently believe to be immaterial may also impair our operations and business results.

A substantial portion of our revenue is derived from a few customers. If we were to lose a key customer, it would have a material adverse effect on our business, financial condition and results of operations.

In fiscal year 2017, our top 20 customers accounted for 94% of our sales, with our current largest customer accounting for 50% of our sales. This customer has made purchase commitments to us through calendar 2018. The loss of this customer or any of our significant customers, would severely impact us, including having a material adverse effect on our business, financial condition, cash flows, revenue and results of operations. As previously discussed, our former largest customer has informed us that they have replaced a primary product that we sell with one that they now manufacture. Therefore, although we expect to continue to have sales to this customer in fiscal 2018, we expect revenue to this customer to continue to decline.

A substantial portion of our business is derived from our core business area that, if not serviced properly, may result in a material adverse impact upon our business, results of operations and financial condition.

In fiscal year 2017, we derived 85% of our revenue from sales of our medical device products and related services. We believe that a primary factor in the market acceptance of our products and services is the value they create for our customers. Our future financial performance will depend in large part on our ability to continue to meet the increasingly sophisticated needs of our customers through the timely development, successful introduction and implementation of new and enhanced products and services, while at the same time continuing to provide the value our customers have come to expect from us. We have historically expended a significant percentage of our revenue on product development and believe that significant continued product development efforts will be required to sustain our growth. Continued investment in our sales and marketing efforts will also be required to support future growth.

There can be no assurance that we will be successful in our product development efforts, that the market will continue to accept our existing products, or that new products or product enhancements will be developed and implemented in a timely manner, meet the requirements of our customers, or achieve market acceptance. If the market does not continue to accept our existing products, or our new products or product enhancements do not achieve market acceptance, our business, results of operations and financial condition could be materially adversely affected.

Our customers may cancel or reduce their orders, change production quantities or delay production, any of which would reduce our sales and adversely affect our operating results.

Since most of our customers purchase our products from us on a purchase order basis, they may cancel, change, or delay product purchase commitments with little notice to us. As a result, we are not always able to forecast with certainty the sales that we will make in a given period and sometimes we may increase our inventory, working capital, and overhead in expectation of orders that may never be placed, or, if placed, may be delayed, reduced, or canceled.

The following factors, among others, affect our ability to forecast accurately our sales and production capacity:


	·	Changes in the specific products or quantities our customers order; and
	·	Long lead times and advance financial commitments for components required to complete actual/anticipated customer orders.

Delayed, reduced or canceled purchase orders also may result in our inability to recover costs that we incur in anticipation of those orders, such as costs associated with purchased raw materials and write-offs of obsolete inventory.

In fiscal 2017 we invested in Monogram Orthopaedics Inc. (“Monogram”), a start-up technology company which requires additional funding to complete its regulatory path. If Monogram is not successful in raising the funds it needs to bring its technology to market, it could negatively impact our results of operations and financial condition.

We recently invested $450,000 in Monogram through a secured convertible promissory note, which funds shall be used as seed money to assist Monogram in progressing to its next stage of financing, which additional financing we understood will be required to allow Monogram to complete its FDA regulatory approval requirements. If Monogram is not successful in raising the additional capital it requires, we may need to impair our existing and/or future investments in Monogram, which would be adverse to our results of operations and financial condition.

In recent years, we have launched many new medical device products and our estimates of warranty claims are based largely on our previous history from similar legacy products and if actual warranty claims exceed our estimates, it could have an adverse effect on our results of operations and financial condition.

We have recently completed significant medical device development projects in the craniomaxillofacial (“CMF”) surgical segment as well as a surgical handpiece used for orthopedic applications for which we have made estimates of product warranty claims based upon similar, legacy products. If the actual repair volumes or repair costs exceed the estimates that we have been using, we may incur additional costs which could be materially adverse to our results of operations and financial condition.

We face significant competition from a number of different sources, which could negatively impact our results of operations and business conditions.

We compete in all of our markets with other major surgical device and related companies. As a provider of outsourced products and services, we also compete with our customers’ own internal development groups. Competitive pressures and other factors, such as new product or new technology introductions by us, our customers’ internal development and manufacturing departments, or our competitors may result in price or market share erosion that could have a material adverse effect on our business, results of operations and financial condition. Also, there can be no assurance that our products and services will achieve broad market acceptance or will successfully compete with other products.

The industry in which we operate is subject to significant technological change and any failure or delay in addressing such change could adversely affect our competitive position or could make our current products obsolete.

The medical device market is generally characterized by rapid technological change, changing customer needs, frequent new product introductions and evolving industry standards. The introduction of products incorporating new technologies and the emergence of new industry standards could render our existing products obsolete and unmarketable. There can be no assurance that we will be successful in developing and marketing new products that respond to technological changes or evolving industry standards.

New product development requires significant research and development expenditures that we have historically funded through operations; however we may be unable to do so in the future. Any significant decrease in revenues or research funding could impair our ability to respond to technological advances in the marketplace and to remain competitive. If we are unable, for technological or other reasons, to develop and introduce new products in a timely manner in response to changing market conditions or customer requirements, our business, results of operations and financial condition may be materially adversely affected. Although we continue to target new markets for access, develop new products and update existing products, there can be no assurance that we will do so successfully or that even if we are successful, such efforts will be completed concurrently with or prior to the introduction of competing products. Any such failure or delay could adversely affect our competitive position or could make our current products obsolete.

We rely heavily on our proprietary technology, which, if not properly protected or if deemed invalid, could have a material adverse effect on our business, results of operations and financial condition.

We are dependent on the maintenance and protection of our proprietary technology and rely on patent filings, exclusive development and supply agreements, confidentiality procedures and employee nondisclosure agreements to protect it. There can be no assurance that the legal protections and precautions taken by us will be adequate to prevent misappropriation of our technology or that competitors will not independently develop technologies equivalent or superior to ours. Further, the laws of some foreign countries do not protect our proprietary rights to as great an extent as do the laws of the United States and are often not enforced as vigorously as those in the United States.

We do not believe that our operations or products infringe on the intellectual property rights of others. However, there can be no assurance that others will not assert infringement or trade secret claims against us with respect to our current or future products. Assertions or claims by others, whether or not valid, could cause us to incur significant legal costs defending our intellectual property rights and potentially require us to enter into a license agreement or royalty arrangement with the party asserting the claim or to cease our use of the infringing technology, any of which could have a material adverse effect on our business, results of operations and financial condition.

Two of our directors hold voting power with respect to a substantial portion of our outstanding common stock that enables them to have significant influence over the outcome of all matters submitted to our shareholders for approval, which influence may conflict with our interests and the interests of other shareholders.

As of August 18, 2017, two of our directors, Nicholas J. Swenson and Raymond E. Cabillot, controlled voting power over approximately 41% (27% and 14%, respectively) of the outstanding shares of our common stock. As a result of such voting control, these directors will have significant influence over all matters submitted to our shareholders for approval, including the election of our directors and other corporate actions, and may have interests that conflict with our interests and the interests of other shareholders.

We may not be able to successfully integrate our business acquisitions, which could adversely affect our business, financial condition, and results of operations.

We have acquired, and may acquire in the future, businesses, products, and technologies that complement or expand our current operations. Acquisitions could require significant capital investments and require us to integrate with companies that have different cultures, management teams, and business infrastructure. Depending on the size and complexity of an acquisition, our successful integration of the acquisition could depend on several factors, including:


	·	Difficulties in assimilating and integrating the operations, products, and workforce of an acquired business;
	·	The retention of key employees;
	·	Management of facilities and employees in separate geographic areas;
	·	The integration or coordination of different research and development and product manufacturing facilities;
	·	Successfully converting information and accounting systems, and
	·	Diversion of resources and management attention from our other operations.

If market conditions or other factors require us to change our strategic direction, we may fail to realize the expected value from one or more of our acquisitions. Our failure to successfully integrate our acquisitions or realize the expected value from past or future acquisitions could harm our business, financial condition, and results of operations.

Our quarterly results can fluctuate significantly from quarter to quarter, which may negatively impact the price of our shares and/or cause significant variances in the prices at which our shares trade.

Our sales have fluctuated in the past, and may fluctuate in the future from quarter to quarter and period to period, as a result of a number of factors including, without limitation: the size and timing of orders from customers; the length of new product development cycles; market acceptance of new technologies; changes in pricing policies or price reductions by us or our competitors; the timing of new product announcements and product introductions by us or our competitors; the financial stability of major customers; our success in expanding our sales and marketing programs; acceleration, deferral, or cancellation of customer orders and deliveries; changes in our strategy; revenue recognition policies in conformity with accounting principles generally accepted in the United States (“GAAP”); personnel changes; and general market and economic factors.

Because a significant percentage of our expenses are fixed, a variation in the timing of sales can cause significant fluctuations in operating results from quarter to quarter. As a result, we believe that interim period-to-period comparisons of our results of operations are not necessarily meaningful and should not be relied upon as indications of future performance. Further, our historical operating results are not necessarily indicative of future performance for any particular period.

In addition, it is possible that our operating results in future quarters may be below the expectations of public market analysts and investors. In such an event, the price of our common stock could be materially adversely affected.

Our operations are subject to a number of complex government regulations, the violation of which could have a material adverse effect on our business.

The manufacture and distribution of medical and dental devices are subject to state and federal requirements set forth by various government agencies including the FDA and EPA. The statutes, regulations, administrative orders, and advisories that affect our businesses are complex and subject to diverse, often conflicting, interpretations. While we make every effort to maintain full compliance with all applicable laws and regulations, we are unable to eliminate the ongoing risk that one or more of our activities may at some point be determined to be non-compliant. The penalties for non-compliance could range from an administrative warning to termination of a portion of our business. Furthermore, even if we are subsequently determined to have fully complied with applicable laws or regulations, the costs to achieve such a determination and the intervening loss of business could adversely affect or result in the cessation of a portion of our business. A change in such laws or regulations at any time may have an adverse effect on our operations.

The FDA designates all medical devices into one of three classes (Class I, II or III) based on the level of control necessary to assure the safety and effectiveness of the device (with Class I requiring the lowest level of control and Class III requiring the greatest level of control). The surgical instrumentation we manufacture is generally classified into Class I, and our dental instrumentation is generally classified into Class II. The FDA has broad enforcement powers to recall and prohibit the sale of products that do not comply with federal regulations, and to order the cessation of non-compliant processes. No claim has been made to date by the FDA regarding any of our products or processes. Nevertheless, as is common in the industry, certain of our products and processes are from time to time subject to routine governmental reviews and investigations. We are also subject to EPA regulations concerning the disposal of industrial waste.

While management believes that our products and processes fully comply with applicable laws and regulations, we are unable to predict the outcome of any such future review or investigation.

We face increased costs in the healthcare industry due to government reform.

Political, economic and regulatory influences are subjecting the healthcare industry to fundamental changes. The Affordable Care Act enacted sweeping reforms to the U.S. healthcare industry, including mandatory health insurance, reforms to Medicare and Medicaid, the creation of large insurance purchasing groups, new taxes on medical equipment manufacturers, currently suspended through 2017, that apply to certain of our products and other significant modifications to the healthcare delivery system.

The global economic environment may impact our business, operating results or financial condition.

Changes in the global economic environment have caused, and may cause in the future, a general tightening in the credit markets, lower levels of liquidity, increases in rates of default and bankruptcy, and extreme volatility in credit, equity and fixed income markets. These macroeconomic developments could negatively affect our business, operating results or financial condition should they cause, for example, current or potential customers to become unable to fund purchases of our products, in turn resulting in delays, decreases or cancellations of purchases of our products and services, or causing the customer to not pay us or to delay paying us for previously purchased products and services. In addition, financial institution failures may cause us to incur increased expenses or make it more difficult either to obtain financing for our operations, investing activities (including the financing of any future acquisitions), or financing activities. Additional economic risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially and adversely affect our business, financial condition or operating results.

We face risks and uncertainties associated with potential litigation by or against us, which could have a material adverse effect on our business, results of operations and financial condition.

We continually face the possibility of litigation as either a plaintiff or a defendant. It is not reasonably possible to estimate the awards or damages, or the range of awards or damages, if any, that we might incur in connection with such litigation.

Many of our products are complex and technologically advanced. Such products may, from time to time, be the subject of claims concerning product performance and construction, including warranty claims. While we are committed to correcting such problems as soon as possible, there is no assurance that solutions will be found on a timely basis, if at all, to satisfy customer demands or to avoid potential claims or litigation. Also, due to the location of our facilities, as well as the nature of our business activities, there is a risk that we could be subject to litigation related to environmental remediation claims. We maintain insurance to protect against claims associated with the manufacture and use of our products as well as environmental pollution, but there can be no assurance that our insurance coverage will adequately cover any claim asserted against us.

The uncertainty associated with potential litigation may have an adverse impact on our business. In particular, litigation could impair our relationships with existing customers and our ability to obtain new customers. Defending or prosecuting litigation could result in significant legal costs and a diversion of management’s time and attention away from business operations, either of which could have a material adverse effect on our business, results of operations and financial condition. There can be no assurance that litigation would not result in liability in excess of our insurance coverage, that our insurance will cover such claims or that appropriate insurance will continue to be available to us in the future at commercially reasonable rates.

Our operations are dependent upon our key personnel. If such personnel were to leave unexpectedly, we may not be able to execute our business plan.

Our future performance depends in significant part upon the continued service of our key technical and senior management personnel. Because we have a relatively small number of employees when compared to other companies in the same industry, our dependence on maintaining our relationship with key employees is particularly significant. We are also dependent on our ability to attract and retain high quality personnel, particularly in the areas of product development, operations management, marketing and finance.

A high level of employee mobility and the aggressive recruiting of skilled personnel characterize the medical device industry. There can be no assurance that our current employees will continue to work for us. Loss of services of key employees could have a material adverse effect on our business, results of operations and financial condition. Furthermore, we may need to provide enhanced forms of incentive compensation to attract and retain such key personnel.

We have experienced losses in the past, and we cannot be certain that we will sustain our current profitability; we may need additional capital in the future to fund our businesses, which we may not be able to obtain on acceptable terms.

We have experienced operating losses in the past. Although we were profitable in fiscal 2017 and 2016, we incurred pre-tax losses from continuing operations of $446,000, $755,000, and $1,903,000 in fiscal 2015, 2014 and 2013, respectively. Our ability to achieve or sustain profitability is based on a number of factors, many of which are out of our control, including the material costs for our products and the demand for our products.

We currently anticipate that our available capital resources, including our existing cash and cash equivalents and accounts receivable balances will be sufficient to meet our expected working capital and capital expenditure requirements as our business is currently conducted for at least the next 12 months. We may also attempt to raise additional funds through public or private debt or equity financings if such financings become available on acceptable terms. We cannot be certain that any additional financing we may need will be available on terms acceptable to us, or at all. If adequate funds are not available or are not available on acceptable terms, we may not be able to take advantage of opportunities, develop new products or otherwise respond to competitive pressures, and our operating results and financial condition could be adversely affected.

We are subject to changes in and interpretations of financial accounting matters that govern the measurement of our performance, compliance with which could be costly and time consuming.

We are subject to changes in and interpretations of financial accounting standards that govern the measurement of our performance. Based on our reading and interpretations of relevant pronouncements, guidance, or concepts issued by, among other authorities, the Financial Accounting Standards Board, the SEC and the American Institute of Certified Public Accountants, management believes our performance, including current sales contract terms and business arrangements, has been properly reported. However, there continue to be issued pronouncements, interpretations and guidance for applying the relevant standards to a wide range of contract terms and business arrangements that are prevalent in the industries in which we operate. Future interpretations or changes by the regulators of existing accounting standards or changes in our business practices may result in future changes in our accounting policies and practices that could have a material adverse effect on our business, financial condition, cash flows, revenue and results of operations.

Our evaluation of internal controls and remediation of potential problems is costly and time consuming and could expose weaknesses in financial reporting.

Section 404 of the Sarbanes-Oxley Act of 2002, as amended, requires management’s assessment of the effectiveness of our internal control over financial reporting. This process is expensive and time consuming, and requires significant attention of management. Management can give no assurance that material weaknesses in internal controls will not be discovered. If a material weakness is discovered, corrective action may be time consuming and costly, and could further divert the attention of management. The disclosure of a material weakness, even if quickly remedied, could reduce the market’s confidence in our financial statements and harm our stock price, especially if a restatement of financial statements for past periods is required.

ITEM 1B.

UNRESOLVED STAFF COMMENTS

None.

ITEM 2.

PROPERTIES

Our executive offices and Irvine manufacturing facility are located at 2361 McGaw Avenue, Irvine, California 92614. We lease the 28,000 square foot facility from an unrelated third party at a current base monthly lease rate of $39,452 through the expiration of the lease in April 2018. The building is a one-story stand-alone structure of concrete “tilt-up” construction, approximately 25 years old and in good condition.

Our San Dimas office and manufacturing facility is located at 210 West Arrow Highway, Suites C & D, San Dimas, California 91773. The 3,680 square foot facility is leased from an unrelated third party, at a base monthly lease rate of $2,870 through the expiration of the lease in February 2019. The suites are located in a one-story building in an approximately 35-year-old industrial office complex and are in fair condition.

The current leased facilities are believed to be adequate for our expected needs. We believe each facility is in full compliance with applicable state, EPA and other agency environmental standards.

ITEM 3.

LEGAL PROCEEDINGS

See Note 11 of Notes to Consolidated Financial Statements contained elsewhere in this report.

ITEM 4.

MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5.

MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information

Our common stock is quoted under the symbol “PDEX” on the automated quotation system of the Nasdaq Capital Market (“NASDAQ”). The following table sets forth for the quarters indicated the high and low sales prices of our common stock as reported by NASDAQ. The quotations reflect inter-dealer prices, without retail markup, markdown, or commissions, and may not necessarily represent actual transactions. On September 8, 2017, the last sale price of our common stock as reported by NASDAQ was $7.50 per share.


	High		Low
Year ended June 30, 2017:
First Quarter	$	6.53	$	4.41
Second Quarter		5.26		4.10
Third Quarter		5.60		4.55
Fourth Quarter		6.15		4.30
Year ended June 30, 2016:
First Quarter	$	2.79	$	2.00
Second Quarter		2.78		2.37
Third Quarter		3.82		2.24
Fourth Quarter		5.61		3.32

Holders

As of September 8, 2017, there were 143 holders of record of our common stock. This number does not include beneficial owners including holders whose shares are held in nominee, or “street,” name.

Dividends

We have never paid a cash dividend with respect to our common stock. The current policy of our Board of Directors is to retain any future earnings to provide funds for the operation and expansion of our business. Any determinations to pay dividends in the future will be at the discretion of our Board of Directors.

Repurchases

There were no repurchases during the fourth quarter of fiscal 2017.

Recent Sales

In February 2017, our Board approved an At The Market Offering Agreement (“ATM” or ATM Agreement”) with Ascendiant Capital Markets, LLC (“Ascendiant”). The ATM Agreement allows the Company to sell shares of its common stock pursuant to specific parameters defined by the Company as well as those defined by the SEC and the ATM Agreement. During the fiscal quarter ended June 30, 2017 we sold 8,276 shares of common stock and raised proceeds of $48,000 net of commissions and paid fees to Ascendiant totaling $1,500. The shares were sold pursuant to the Company’s shelf registration statement on Form S-3, as amended (File No. 333-215032) which was declared effective on February 8, 2017 by the SEC.

ITEM 6.

SELECTED FINANCIAL DATA

Not applicable.

ITEM 7.

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion of our financial condition and results of operations should be read in conjunction with our Consolidated Financial Statements and the Notes thereto contained elsewhere in this report as well as the Risk Factors included in Item 1A of this report. The following discussion contains forward-looking statements. (See “Cautionary Note Regarding Forward-Looking Statements” included in Part 1 of this report.)

Overview

The following discussion and analysis provides information that management believes is relevant to an assessment and understanding of the Company’s results of operations and financial condition for the fiscal years ended June 30, 2017 and 2016. The income from discontinued operations included in our consolidated statement of operations relates to the sale of our OMS division, which we sold in January, 2017.

The Company, headquartered in Irvine, California specializes in the design, development and manufacture of autoclavable, battery-powered and electric, multi-function surgical drivers and shavers used primarily in the orthopedic, spine, and maxocranial facial markets. The Company also sells dental instruments and rotary air motors. Our products are found in hospitals, dental offices, medical engineering labs, scientific research facilities and high-tech manufacturing operations around the world.

In addition to our principal operations described above, our Fineline Molds division, located in San Dimas, California manufactures plastic injection molds for a wide variety of industries. Through April, 2017, we provided engineering consulting and placement services, as well as quality and regulatory consulting services through our Engineering Services Division. Although we continue to provide engineering, quality and regulatory consulting services to our customers, we have ceased placement services and accordingly have disbanded our Engineering Services Division. The cessation of placement services is not expected to have a material impact on our financial position or results of operations.

Critical Accounting Policies

Our consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States of America (“GAAP”). The preparation of our financial statements requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosures. We base our estimates on historical experience and various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates.

Revenue Recognition

Revenue on product sales is recognized upon shipment to the customer when risk of loss and title transfer to the customer and all other conditions required by GAAP, as promulgated by the Financial Accounting Standards Board (“FASB”) in Accounting Standards Codification (“ASC”) Section 605 “Revenue Recognition” have been satisfied.

Revenue from billable product development service portions of development and supply contracts is generally recognized either upon milestone completion or completion of the product development services, in conformity with ASC Section 605. We recognize revenue that is contingent upon the achievement of a substantive milestone in its entirety in the period in which the milestone is achieved. A milestone is considered substantive when the consideration payable to us for such milestone (i) is consistent with our performance necessary to achieve the milestone, (ii) relates solely to our past performance and (iii) is reasonable relative to all of the other deliverables and payments within the arrangement. In making this assessment, we consider all facts and circumstances relevant to the arrangement, including factors such as the scientific, regulatory, commercial and other risks that must be overcome to achieve the milestone, the level of effort and investment required to achieve the milestone and whether any portion of the milestone consideration is related to future performance or deliverables. Accordingly, in certain cases, based upon the evaluation of the criteria above, we record revenue upon milestone completion and in other cases revenue from product development milestone billings to our customers is deferred until completion of all development phases or milestones.

Returns of our product for credit are minimal; accordingly, we do not establish a reserve for product returns at the time of sale.

Estimated Losses on Product Development Services

Cost and revenue estimates related to the product development service portions of development and supply contracts are reviewed and updated quarterly. When it is probable that total costs from the development portion of such contracts will exceed product development service revenue, the expected loss is recognized immediately in cost of sales.

Owing to the complexity of many of the contracts we have undertaken, the cost estimation process requires significant judgment. It is based upon the knowledge and experience of our project managers, engineers, and finance professionals. Factors that are considered in estimating the cost of work to be completed and ultimate profitability of the fixed price product development portion of development and supply contracts include the nature and complexity of the work to be performed, availability and productivity of labor, the effect of change orders, the availability of materials, performance of subcontractors, and expected costs for specific regulatory approvals.

Warranties

Certain of our products are sold with a warranty that provides for repairs or replacement of any defective parts for a period, generally one to two years, after the sale. At the time of the sale, we accrue an estimate of the cost of providing the warranty based on prior experience with such factors as return rates and repair costs, which factors are reviewed quarterly.

Warranty expenses, including changes of estimates, are included in cost of sales in our consolidated statements of operations.

Inventories

Inventories are stated at the lower of cost (first-in, first-out method) or market value. Reductions to estimated market value are recorded, and charged to cost of sales, when indicated based on a formula that compares on-hand quantities to both historical usage and estimated demand over the ensuing 12 months from the measurement date.

Accounts Receivable and Deferred Costs

Trade receivables are stated at their original invoice amounts, less an allowance for doubtful portions of such accounts. Management determines the allowance for doubtful accounts based on facts and circumstances related to specific accounts, and on historical experience related to the age of accounts. Trade receivables are written off when deemed uncollectible. Recoveries of trade receivables previously reserved are offset against the allowance when received.

Deferred costs reflect costs incurred related to non-recurring engineering services under the terms of the related development and supply contracts. These costs get recorded to cost of sales in the period that the revenue is recognized pursuant to the terms of the underlying contract with our customer.

Investments

Investments reported on the June 30, 2017 balance sheet consist of marketable equity securities of publicly held companies. The investments were made to realize a reasonable return, although there is no assurance that positive returns will be realized. Investments are marked to market at each measurement date, with unrealized gains and losses, net of income taxes, presented as adjustments to accumulated other comprehensive income or loss.

Long-lived Assets

We review the recoverability of long-lived assets, consisting of equipment and leasehold improvements, when events or changes in circumstances occur that indicate carrying values may not be recoverable.

Goodwill & Intangibles

We recorded goodwill and a trade name in conjunction with the asset purchase of Fineline Molds during fiscal 2015. We assess the potential impairment of goodwill and trade name on an annual basis, or more frequently if there are events or changes in circumstances that may indicate potential impairment. Other intangibles consist of legal fees incurred in connection with patent applications, capitalized software development costs, covenant not to compete, and customer lists including backlog. Both the legal fees and the capitalized software development costs will be amortized over the estimated product life of the underlying product related to the associated patent and software development costs. The covenant not to compete and customer list including backlog relate to assets acquired in conjunction with the purchase of Huber Precision and Fineline Molds and will be amortized over their estimated useful lives.

Notes Receivable

Notes receivable are stated at unpaid principal balance and are subject to impairment losses. Management considers a note impaired when based upon current information or factors it is probable that the principal and interest payments will not be collected, or converted to equity, according to the terms of the secured convertible promissory note.

Business Combinations

We allocate the fair value of purchase consideration to the tangible assets acquired, liabilities assumed and intangible assets acquired based on their estimated fair values. The excess of the fair value of purchase consideration over the fair values of these identifiable assets and liabilities is recorded as goodwill. Such valuations require management to make significant estimates and assumptions, especially with respect to intangible assets. Significant estimates in valuing certain intangible assets include, but are not limited to, future expected cash flows, useful lives and discount rates. Management’s estimates of fair value are based upon assumptions believed to be reasonable, but which are inherently uncertain and unpredictable and, as a result, actual results may differ from estimates. During the measurement period, which is one year from the acquisition date, we may record adjustments to the assets acquired and liabilities assumed, with the corresponding offset to goodwill. Upon the conclusion of the measurement period, any subsequent adjustments are recorded to earnings.

Income Taxes

We recognize deferred tax assets and liabilities for temporary differences between the financial reporting basis and the tax basis of our assets and liabilities along with net operating loss and tax credit carryovers. Deferred tax assets at June 30, 2017 and 2016 consisted primarily of basis differences related to research and development tax credit utilization, intangible assets, accrued expenses and inventories.

Significant management judgment is required in determining our provision for income taxes and the recoverability of our deferred tax assets. Such determination is based on our historical taxable income, with consideration given to our estimates of future taxable income and the periods over which deferred tax assets will be recoverable. In evaluating our ability to recover our deferred tax assets, we consider all available positive and negative evidence, including reversals of deferred tax liabilities, projected future taxable income and results of recent operations. The assumptions about future taxable income require significant judgment and are consistent with the plans and estimates we are using to manage the underlying business. In evaluating the objective evidence that historical results provide, we consider three years of cumulative operating income (loss). During fiscal 2017, we released approximately $3.3 million of the tax effected valuation allowance, as the Company determined that it was more likely than not that it would generate sufficient levels of profitability to realize substantially all of its deferred tax assets.

Results of Operations for the Fiscal Year Ended June 30, 2017 Compared to the Fiscal Year Ended June 30, 2016

The following tables set forth results from continuing operations for the fiscal years ended June 30, 2017 and 2016:


	Years Ended June 30,
	2017						2016
	(Dollars in thousands)
				% of Net Sales					% of Net Sales
Net sales	$	21,943			100	%	$	19,189		100	%
Cost of sales		14,757			67	%		14,271		74	%
Gross profit		7,186			33	%		4,918		26	%
Selling expenses		585			3	%		780		4	%
General and administrative expenses		2,529			12	%		1,882		10	%
Impairment of goodwill and intangible assets		113			1	%		245		1	%
Research and development costs		1,225			6	%		1,204		6	%
		4,452			20	%		4,111		21	%
Operating income		2,734			12	%		807		4	%
Other income, net		18			—			321		2	%
Income from continuing operations before income taxes		2,752			13	%		1,128		6	%
Income tax expense (benefit)		(2,089	)		(10	%)		25		—
Net income from continuing operations	$	4,841			22	%	$	1,103		6	%

Net Sales

The majority of our revenue is derived from designing, developing and manufacturing powered surgical instruments for medical device original equipment manufacturers, dental instruments, and rotary air motors. The proportion of total sales by product/service type is as follows:


	Years Ended June 30,										Increase (Decrease) From 2016 To 2017
	2017					2016					Increase (Decrease) From 2016 To 2017
	(Dollars in thousands)
			% of Net Sales					% of Net Sales
Net sales:
Medical device and services	$	18,584		85	%	$	14,292		75	%		30	%
Industrial and scientific		882		4	%		857		4	%		3	%
Dental and component		786		4	%		1,176		6	%		(33	%)
Repairs		302		1	%		809		4	%		(63	%)
Other		1,389		6	%		2,055		11	%		(32	%)
	$	21,943		100	%	$	19,189		100	%		14	%

Net sales in fiscal 2017 increased by $2.8 million, or 14%, as compared to fiscal 2016, due primarily to an increase in medical device sales of $4.3 million offset by a decrease in dental and component revenue of $390,000, repair revenue of $507,000 and other revenue of $666,000. During fiscal 2017 sales to our largest customer increased by $5.9 million to $10.9 million up from $5.0 million in fiscal 2016. We manufacture a surgical handpiece designed to be used in orthopedic surgery applications for this customer and we ramped up sales volume to approximately 150 units per month during fiscal 2017 year compared to an average of 50 to 100 units during fiscal 2016. Offsetting the increases from this customer, sales to our oldest and formerly most significant customer in medical device have decreased by approximately $2.1 million, from $3.6 million to $1.5 million, of which approximately $500,000 relates to repairs, this fiscal year compared to the prior fiscal year. This customer replaced a primary product that we used to sell to them with one that they now manufacture. Therefore, although we expect to continue to have sales to this customer in fiscal 2018, we expect revenue to this customer to continue to decline.

Our dental and component revenue are generated from sales to many distributors and end-users whose purchasing activity can vary widely from year to year. Our dental and component products are legacy products, which although they continue to sell to many long-held customers, have not had a product line refresh, which may be a contributing factor to the decrease in sales of $390,000 in fiscal 2017 compared to the prior fiscal year. Our repair revenue declined $507,000 in fiscal 2017 compared to fiscal 2016, driven by the reduced sales to our former largest medical device customer, described above. Finally, our other revenue decreased $666,000 in fiscal 2017 compared to the prior fiscal year and it includes revenue generated from our Fineline Molds and Engineering Services Division of $956,000 and $437,000, respectively, in the current year, representing decreases of $345,000 and $293,000, respectively, compared to fiscal 2016. The $345,000 decrease in sales of Fineline Molds is due in part to fiscal 2017 sales mix being comprised of more repair and smaller jobs as compared to the prior fiscal year. The $293,000 decrease in Engineering Services Division revenue relates to the completion of the contract for temporary employees in New Jersey. As indicated previously, in April 2017 we made a conscious decision to disband our Engineering Services Division.

Cost of Sales and Gross Margin


	Years Ended June 30,											Increase (Decrease) From 2016 To 2017
	2017					2016						Increase (Decrease) From 2016 To 2017
	(Dollars in thousands)
			% of Net Sales						% of Net Sales
Cost of sales:
Product costs	$	14,597		67	%	$	14,587			76	%		—
Accrued losses on product development services		—		—			62			—			(100	%)
Under (over)-absorption of manufacturing overhead		115		—			(594	)		(3	%)		119	%
Inventory and warranty charges		45		—			216			1	%		(79	%)
Total cost of sales	$	14,757		67	%	$	14,271			74	%		3	%

Cost of sales in fiscal 2017 increased $486,000, or 3%, from fiscal 2016, due primarily to a $709,000 increase in absorption of manufacturing overhead offset by a decrease in inventory and warranty charges of $171,000 and accrued losses on product development services of $62,000. The increase in total costs of sales is less than the 14 percent increase in revenue for the same period, due in large part to savings made by in-sourcing previously out-sourced manufactured parts. Our gross margin increased from 26 percent in fiscal 2016 to 33 percent in fiscal 2017, largely due to these savings. During fiscal 2017 we did not incur any losses from the development services portion of certain contracts compared to $62,000 in fiscal 2016, due to improved project management. Under-absorption of manufacturing costs increased by $709,000 for fiscal 2017 compared to fiscal 2016 due primarily to adjustments made to lower our standard labor and overhead rates at the beginning of fiscal 2017 in anticipation of higher manufacturing volumes. Costs related to inventory and warranty charges decreased $171,000 in fiscal 2017 compared to 2016 due primarily to $337,000 in decreased warranty expenses and an increase of $166,000 in inventory charges.

Operating Expenses


	Years Ended June 30,										Increase (Decrease) From 2016 To 2017
	2017					2016					Increase (Decrease) From 2016 To 2017
	(Dollars in thousands)
			% of Net Sales					% of Net Sales
Operating expenses:
Selling expenses	$	585		3	%	$	780		4	%		(25	%)
General and administrative expenses		2,529		11	%		1,882		10	%		34	%
Impairment of goodwill and intangible assets		113		—			245		1	%		(54	%)
Research and development costs		1,225		6	%		1,204		6	%		2	%
	$	4,452		20	%	$	4,111		21	%		8	%

Selling expenses consist of salaries and other personnel-related expenses related to our business development departments, as well as trade show attendance, advertising and marketing expenses, and travel and related costs incurred in generating and maintaining customer relationships.

Selling Expenses by division
(in thousands except % of total)


	Years Ended June 30,										Decrease From 2016 To 2017
	2017					2016					Decrease From 2016 To 2017
	(Dollars in thousands)
			% of Total					% of Total
Selling expenses:
Pro-Dex (Irvine)	$	188		32	%	$	254		32	%		(26	%)
ESD Division (Irvine)		262		45	%		325		42	%		(19	%)
Fineline Division (San Dimas)		135		23	%		201		26	%		(33	%)
	$	585		100	%	$	780		100	%		(25	%)

Selling expenses for Pro-Dex Irvine during the fiscal year ended June 30, 2017 decreased $66,000, or 26%, compared to fiscal 2016 mostly due to the fact that the Huber intangible assets which had been amortized in the prior fiscal year were impaired during the first quarter of fiscal 2017. The prior fiscal year amortization accounts for approximately $30,000 of the decrease, with the remaining decrease related to reduced commission and bonus expense of $20,000 and external consulting fees of $13,000. As previously discussed we disbanded our engineering services division (“ESD”) during the fourth quarter of fiscal 2017, due to poor performance, resulting in selling expenses for this division decreasing $63,000 in fiscal 2017 compared to fiscal 2016, mostly due to reduced personnel expenses. The decrease in the Fineline division selling expenses in fiscal 2017 is due to reduced commission expense of approximately $40,000 and a recovery of bad debt expense in the amount of $15,000, which amount had been expensed during fiscal 2016.

General and administrative expenses (“G&A”) consist of salaries and other personnel-related expenses for corporate, accounting, finance and human resource personnel, as well as costs for outsourced information technology services, professional fees, directors’ fees and costs associated with being a public company. The $647,000 increase in G&A expenses from fiscal 2016 to 2017 is due primarily to bonus accruals and increased legal and professional fees. Much of the increased legal fees relate to the ongoing litigation described in Note 11 of the Consolidated Financial Statements contained elsewhere in this report.

Impairment of goodwill and intangible assets relates to the Huber customer list during fiscal 2017 and Fineline during fiscal 2016 as a result of our annual impairment test described more fully in Note 4 of Notes to Consolidated Financial Statements contained elsewhere in this report.

Research and development costs consist of salaries and other personnel-related costs of our product development and engineering personnel, related professional and consulting fees, and costs related to intellectual property, laboratory usage, materials, and travel and related costs incurred in the development and support of our products. While the increase in research and development costs was only $21,000 in fiscal 2017 as compared to fiscal 2016, the specific cost components did fluctuate. Personnel and related expenses decreased by $262,000 offset by reduced billings to customers in the amount of $165,000 for NRE services and spending on a particular internal development project increased by $109,000.

Interest Expense

Interest expense consists primarily of interest expense related to the loans and notes payable described more fully in Note 10 to the Consolidated Financial Statements contained elsewhere in this report.

Gain from sale of Investment in Ramsey

During the quarter ended March 31, 2016, we sold the Ramsey Property for an aggregate sale price of $1.6 million. Additionally, during the second and third quarter of fiscal 2016 we liquidated the Riverside machine shop equipment and collected some accounts receivable of Riverside that served as collateral to the promissory notes in the gross amount of $529,000. Therefore during the third quarter ended March 31, 2016 we recorded a gain from the sale of the investment in Ramsey in the amount of $340,000.

Income Taxes

The effective tax rate for the year ended June 30, 2017 is lower that the statutory rate primarily because we released a valuation allowance during the year in the amount of $3.3 million. Management concluded that it is more likely than not, that substantially all of its deferred tax assets will be realized, in part because in the current fiscal year, we achieved three years of cumulative pre-tax income and we have forecasted future income. The effective tax rate for the year ended June 30, 2016 is lower than the statutory tax rate due to our utilization of federal and state loss carryforwards.

The $2.1 million of income tax benefit recorded to continuing operations for fiscal 2017 consists of the $3.3 million benefit from the reduction of the valuation allowance, including $2.4 million federal benefit and $900,000 state benefit net of federal impact, offset by $900,000 of federal and state income taxes on current year income from continuing operations and by approximately $300,000 of tax expense for a reduction of state tax losses recorded in prior years.

We expect our effective tax rates for fiscal 2018 to be much closer to statutory rates.

Liquidity and Capital Resources

The following table is a summary of our Consolidated Statements of Cash Flows and Cash and Working Capital:


	As of and for the Years Ended June 30,
	2017			2016
	(In thousands)
Cash provided by (used in):
Operating activities	$	3,235		$	466
Investing activities	$	(1,026	)	$	1,588
Financing activities	$	(298	)	$	(457	)

Cash, cash equivalents and working capital:
Cash and cash equivalents	$	4,205		$	2,294
Working capital	$	9,341		$	7,135

Cash Flows from Operating Activities

Cash provided by operating activities during fiscal 2017 was $3.2 million and relates primarily to our net income of $5.1 million offset by the non-cash increase in the deferred income tax receivables of $2.0 million due to the current year reversal of the valuation allowance. The changes in operating assets and liabilities net to a decrease of approximately $125,000.

Cash provided by operating activities during fiscal 2016 relates primarily to our net income of $822,000 and non-cash impairment charge of $245,000 and non-cash depreciation and amortization of $614,000 offset by both the gain on sale of Ramsey in the amount of $340,000 and increases in total accounts receivable, including amounts due from factor, in the amount of $523,000, consistent with our increase in net sales. Additionally, deferred revenue decreased $382,000 and our accounts payable, accrued expenses and deferred rent decreased by $1.3 million. Offsetting these uses of cash, our inventory decreased by $737,000 and our deferred costs decreased by $615,000 due to the completion of a product development contract.

Cash Flows from Investing Activities

Net cash used in investing activities in fiscal 2017 was $1.0 million. During the 2017 fiscal year, we invested $663,000 in the purchase of marketable equity securities under the direction of the Investment Committee of our Board, made capital expenditures in the amount of $606,000 primarily for manufacturing equipment and invested $450,000 in Monogram Orthopaedics Inc. through a promissory note as further described in Note 9 to the Consolidated Financial Statements contained elsewhere in this report. We also sold our OMS division in January 2017 for proceeds of $636,000.

During fiscal 2016 we sold the Ramsey Property for an aggregate purchase price of $1.6 million realizing cash proceeds from the escrow close in the amount of $1.4 million and liquidated the Riverside machine shop equipment and collected some accounts receivable of Riverside that served as collateral to the promissory notes in the gross amount of $529,000 after investing an additional $87,000. Additionally during fiscal 2016, we made capital expenditures primarily for tooling and manufacturing equipment in the amount of $311,000 and sold fully depreciated equipment for $18,000.

Cash Flows from Financing Activities

During fiscal 2017 we borrowed and repaid the principal amount of $600,000 from Summit Financial Resources LP (“Summit”) and we spent $312,000 on the repurchase of 63,496 shares of our common stock pursuant to the share repurchase program described in more detail below.

During fiscal 2016 we borrowed and repaid the principal amount of $1.7 million and $500,000 from Summit and Fortitude Income Funds LLC, respectively. Additionally, we spent $454,000 on the repurchase of 99,688 shares of our common stock pursuant to the share repurchase program described in more detail below.

Liquidity Requirements for the Next 12 Months

As of June 30, 2017, our working capital was $9.3 million. We currently believe that our existing cash and cash equivalent balances together with our account receivable balances, will provide us sufficient funds to satisfy our cash requirements as our business is currently conducted for at least the next 12 months. In addition to our cash and cash equivalent balances, we expect to derive a portion of our liquidity from our cash flows from operations. We may also borrow against our $500,000 Revolving Loan Facility from Farmers & Merchants Bank of Long Beach.

We are focused on preserving our cash balances by monitoring expenses, identifying cost savings, and investing only in those development programs and products that we believe will most likely contribute to our profitability. As we execute on our current strategy, however, we may require debt and/or equity capital to fund our working capital needs and requirements for capital equipment to support our manufacturing and inspection processes. In particular, we have experienced negative operating cash flow in the past, especially as we procure long-lead time materials to satisfy our backlog, which can be subject to extensive variability. We believe that if we need to raise additional capital to fund our operations we can do so by selling additional shares of our common stock through our ATM.

Surplus Capital Investment Policy

During fiscal 2013, our Board approved a Surplus Capital Investment Policy (the “Policy”) that provides, among other items, for the following:


	(a)	Determination by our Board of Directors of (i) our surplus capital balance and (ii) the portion of such surplus capital balance to be invested according to the Policy;
	(b)	Selection of an Investment Committee responsible for implementing the Policy; and
	(c)	Objectives and criteria under which investments may be made.

The Investment Committee is comprised of Messrs. Swenson (Chair), Cabillot and Van Kirk.

The Investment Committee approved each of the investments comprising the $718,000 of marketable public equity securities held at June 30, 2017, which amount includes unrealized holding gains in the amount of $33,000, net of taxes at June 30, 2017.

In September 2013, our Board approved a share repurchase program authorizing the Company to repurchase up to 750,000 shares of our common stock under parameters to be determined by the Investment Committee. In accordance with, and as part of, this share repurchase program, our Board has approved the adoption of several prearranged share repurchase plans intended to qualify for the safe harbor Rule 10b5-1 under the Securities Exchange Act of 1934, as amended (“10b5-1 Plan” or “Plan”). During the quarter ended September 30, 2016, our Board approved a 10b5-1 Plan, which became effective on September 8, 2016 and terminated on the earlier of September 8, 2017 or when and if the maximum shares are repurchased. During the quarter ended December 31, 2016, the Investment Committee of our Board approved an additional concurrently running 10b5-1 Plan, which became effective on December 8, 2016 and terminates on the earlier of December 8, 2017 or when and if the maximum shares are repurchased. During the fiscal year ended June 30, 2017, we repurchased 63,496 shares at an aggregate cost of $312,000, inclusive of fees under the Plans. On a cumulative basis, we have repurchased a total of 232,957 shares under the share repurchase program at an aggregate cost of $920,000. All repurchases under the 10b5-1 Plans were administered through an independent broker. In February, 2017 our Board terminated the two effective 10b5-1 Plans in conjunction with the approval of the Company’s ATM described further in Note 15 of Notes to Consolidated Financial statements contained elsewhere in this report.

Recent Accounting Pronouncements

In May 2014, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") 2014-09, "Revenue from Contracts with Customers," which outlines a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers and supersedes most current revenue recognition guidance, including industry-specific guidance. ASU 2014-09 requires an entity to recognize revenue depicting the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. ASU 2014-09 also requires enhanced revenue related disclosures. Application of the guidance in ASU 2014-09 is expected to require more judgment and estimates within the revenue recognition process compared to existing GAAP. ASU 2014-09 is required to be adopted by the Company in the first quarter of fiscal 2019. The Company expects to adopt the requirements of ASU 2014-09 using the modified retrospective adoption method. The Company also expects that disclosures related to revenue recognition including judgments made will increase compared to existing GAAP. The Company is currently evaluating the impact of the future adoption of ASU 2014-09 on its consolidated financial statements and does not currently expect significant changes in the timing of revenue recognition compared to existing GAAP.

In February 2016, the FASB issued ASU 2016-02, (Topic 842) “Leases”. The objective of this update is to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet and disclosing key information about leasing arrangements. This ASU is effective for fiscal years beginning after December 15, 2018, including interim periods within those annual periods and is to be applied utilizing a modified retrospective approach. While we are still in the process of evaluating the effect of adoption on our consolidated financial statements and are currently assessing our leases, we expect the adoption will lead to a material increase in the assets and liabilities recorded on our consolidated balance sheet.

In March 2016, the FASB issued ASU 2016-09, Compensation-Stock Compensation (Topic 718) “Improvements to Employee Share-Based Payment Accounting”. This update simplifies the accounting for employee share-based payment transactions, including the accounting for income taxes, forfeitures, and statutory tax withholding requirements, as well as classification in the statement of cash flows. This ASU is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. Early adoption is permitted. This guidance will impact our accounting related to future exercises or forfeiture of stock option awards.

In August 2016, the FASB issued ASU 2016-15, Statement of Cash Flows (Topic 230), “Classification of Certain Cash Receipts and Cash Payments”. This update provides guidance on eight specific cash flow issues: (1) debt prepayment or debt extinguishment costs; (2) settlement of zero-coupon bonds; (3) contingent consideration payments made after a business combination; (4) proceeds from the settlement of insurance claims; (5) proceeds from the settlement of corporate-owned life insurance policies, including bank-owned life insurance policies; (6) distributions received from equity method investees; (7) beneficial interests in securitization transactions; and (8) separately identifiable cash flows and application of the predominance principle. The amendments in this update are effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2017. Early adoption is permitted. We do not expect the application of this guidance to have a material impact on our consolidated financial statements.

In May 2017, the FASB issued Accounting Standards Update 2017-09, “Compensation-Stock Compensation (Topic 718): Scope of Modification Accounting” (“ASU 2017-09”). The update provides guidance as to which changes to the terms or conditions of a share-based payment award should be accounted for as a modification under Topic 718. Specifically, an entity would not apply modification accounting if the fair value, vesting conditions, and classification of an award as an equity or liability instrument are the same immediately before and after the modification. The standard is effective for the Company for annual periods beginning after December 15, 2017. Early adoption is permitted and prospective application is required. The Company is currently evaluating the impact of the adoption of ASU 2017-09 on its consolidated financial statements.

ITEM 7A.

QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable.

ITEM 8.

FINANCIAL STATEMENTS AND SUPPLEMENTAL DATA

PRO-DEX, INC. AND SUBSIDIARIES

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS


	Page
Report of Independent Registered Public Accounting Firm	23
Consolidated Financial Statements:
Consolidated Balance Sheets, June 30, 2017 and 2016	24
Consolidated Statements of Operations and Comprehensive Income, Years Ended June 30, 2017 and 2016	25
Consolidated Statements of Shareholders’ Equity, Years Ended June 30, 2017 and 2016	26
Consolidated Statements of Cash Flows, Years Ended June 30, 2017 and 2016	27
Notes to Consolidated Financial Statements	29

Report of Independent Registered Public Accounting Firm

The Shareholders and Board of Directors

Pro-Dex, Inc.

We have audited the accompanying consolidated balance sheets of Pro-Dex, Inc. and Subsidiaries (the “Company”) as of June 30, 2017 and 2016 and the related consolidated statements of operations and comprehensive income, shareholders’ equity and cash flows for each of the two years in the period ended June 30, 2017. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of Pro-Dex, Inc. and Subsidiaries as of June 30, 2017 and 2016, and the consolidated results of its operations and its cash flows for each of the two years in the period ended June 30, 2017, in conformity with accounting principles generally accepted in the United States of America.

/s/ Moss Adams LLP

Moss Adams LLP

Irvine, California

September 14, 2017

PRO-DEX, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(In thousands, except share data)


	June 30,
	2017			2016
ASSETS
Current assets:
Cash and cash equivalents	$	4,205		$	2,294
Investments		718			—
Accounts receivable, net of allowance for doubtful accounts of $3 and $20 at June 30, 2017 and 2016, respectively		3,538			1,469
Due from factor		—			1,419
Deferred costs		12			238
Assets held for sale		—			287
Other current receivables		86			91
Inventory		3,085			3,364
Prepaid expenses		277			129
Total current assets		11,921			9,291
Plant, equipment and leasehold improvements, net		1,429			1,222
Goodwill		112			112
Intangibles, net		320			451
Deferred income taxes, net		2,048			—
Notes receivable (See Note 9)		450			—
Other assets		71			71
Total assets	$	16,351		$	11,147

LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
Accounts payable	$	1,159		$	841
Accrued liabilities		1,344			1,076
Deferred revenue		19			212
Income taxes payable		—			1
Note payable		26			26
Capital lease obligations		32			—
Total current liabilities		2,580			2,156
Non-current liabilities:
Deferred rent		—			68
Notes and capital leases payable, net of current portion		61			46
Total non-current liabilities		61			114
Total liabilities		2,641			2,270

Commitments and Contingencies

Shareholders’ equity:
Common stock, no par value, 50,000,000 shares authorized; 4,025,193 and 4,052,987 shares issued and outstanding at June 30, 2017 and 2016, respectively		17,704			17,988
Accumulated other comprehensive income		33			—
Accumulated deficit		(4,027	)		(9,111	)
Total shareholders’ equity		13,710			8,877
Total liabilities and shareholders’ equity	$	16,351		$	11,147

See notes to consolidated financial statements.

PRO-DEX, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME

(In thousands, except per share data)


	Years Ended June 30,
	2017			2016

Net sales	$	21,943		$	19,189
Cost of sales		14,757			14,271
Gross profit		7,186			4,918

Operating expenses:
Selling expenses		585			780
General and administrative expenses		2,529			1,882
Impairment of goodwill and intangible assets		113			245
Research and development costs		1,225			1,204
Total operating expenses		4,452			4,111
Operating income		2,734			807
Other income (expense):
Interest and dividend income		27			—
Gain from sale of Investment in Ramsey Property		—			340
Gain from disposal of equipment		3			18
Interest expense		(12	)		(37	)
Total other income		18			321

Income from continuing operations before income taxes		2,752			1,128
Income tax (expense) benefit		2,089			(25	)

Net income from continuing operations		4,841			1,103
Income (loss) from discontinued operations, net of income taxes		243			(281	)
Net income	$	5,084		$	822
Other comprehensive income, net of tax:
Unrealized gain from marketable equity investments, net of income taxes		33			—
Comprehensive income	$	5,117		$	822

Basic income (loss) per share:
Net income from continuing operations	$	1.20		$	0.27
Income (loss) from discontinued operations		0.06			(0.07	)
Net income	$	1.26		$	0.20

Diluted income (loss) per share:
Net income from continuing operations	$	1.19		$	0.27
Income (loss) from discontinued operations		0.06			(0.07	)
Net income	$	1.25		$	0.20

Weighted average common shares outstanding:
Basic		4,040,308			4,141,353
Diluted		4,077,575			4,173,556

See notes to consolidated financial statements.

PRO-DEX, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

For The Years Ended June 30, 2016 and 2015

(In thousands, except share data)


	Common Shares						Accumulated Other Comprehensive Income		Accumulated Deficit			Total
	Number of Shares			Amount			Accumulated Other Comprehensive Income		Accumulated Deficit			Total
Balance at June 30, 2015		4,139,579		$	18,411		$	—	$	(9,933	)	$	8,478
Net income		—			—			—		822			822
Exercise of stock options		7,500			16			—		—			16
ESPP shares issued		5,596			11			—		—			11
Share-based compensation		—			4			—		—			4
Share repurchases		(99,688	)		(454	)		—		—			(454	)
Balance at June 30, 2016		4,052,987		$	17,988		$	—	$	(9,111	)	$	8,877
Net income		—			—			—		5,084			5,084
Exercise of stock options⁽¹⁾		23,632			7			—		—			7
Net change in unrealized gain from marketable equity investments		—			—			33		—			33
ESPP shares issued		3,794			18			—		—			18
Share-based compensation		—			3								3
Shares issued under ATM⁽²⁾		8,276			—			—		—			—
Share repurchases		(63,496	)		(312	)		—		—			(312	)
Balance at June 30, 2017		4,025,193		$	17,704		$	33	$	(4,027	)	$	13,710

———————


⁽¹⁾	During fiscal 2017 a total of 33,834 stock options were exercised and a total of 10,202 shares were used to effect a cashless exercise.
⁽²⁾	The proceeds raised from the ATM shares issued in the net amount of $48,000 were accounted for as a reduction of prepaid expenses related to establishing the ATM.

See notes to consolidated financial statements.

PRO-DEX, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)


	Years Ended June 30,
	2017			2016
CASH FLOWS FROM OPERATING ACTIVITIES:
Net income	$	5,084		$	822
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization		555			614
Gain on sale of OMS		(327	)		—
Gain on sale of investment in Ramsey		—			(340	)
Gain on sale or disposal of equipment		(3	)		(18	)
Impairment of goodwill and intangible assets		113			245
Share-based compensation		3			4
Deferred income tax benefit		(2,048	)		—
Allowance for doubtful accounts		(17	)		(16	)
Changes in operating assets and liabilities:
Accounts receivable, due from factor and other current receivables		(633	)		(523	)
Deferred costs		226			615
Assets held for sale		(22	)		—
Inventory		279			737
Prepaid expenses and other assets		(299	)		(5	)
Accounts payable, accrued expenses and deferred rent		518			(1,288	)
Deferred revenue		(193	)		(382	)
Income taxes payable		(1	)		1
Net cash provided by operating activities		3,235			466

CASH FLOWS FROM INVESTING ACTIVITIES:
Purchases of equipment and leasehold improvements		(606	)		(311	)
Proceeds from sale of OMS		636			—
Purchase of notes receivable (See Note 9)		(450	)		—
Investment in Ramsey property and related notes receivable		—			(87	)
Proceeds from sale of investment in Ramsey		86			1,992
Proceeds from sale of equipment		3			18
Increase in intangibles		(32	)		(24	)
Purchase of investments		(663	)		—
Net cash provided by (used in) investing activities		(1,026	)		1,588

CASH FLOWS FROM FINANCING ACTIVITIES:
Principal payments on capital lease and note payable		(59	)		(530	)
Proceeds from shares issued under ATM		48			—
Proceeds from note payable		—			500
Borrowings from Summit loan		600			1,689
Repayments on Summit loan		(600	)		(1,689	)
Repurchases of common stock		(312	)		(454	)
Proceeds from exercise of stock options and ESPP contributions		25			27
Net cash used in financing activities		(298	)		(457	)

Net increase in cash and cash equivalents		1,911			1,597
Cash and cash equivalents, beginning of year		2,294			697
Cash and cash equivalents, end of year	$	4,205		$	2,294

See notes to consolidated financial statements.

PRO-DEX, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS - CONTINUED

(In thousands)


	Years Ended June 30,
	2017		2016
Supplemental disclosures of cash flow information:

Noncash investing and financing activities:
Capital lease for the acquisition of equipment	$	105	$	—
Value of shares surrendered in connection with a stock option exercise	$	64	$	—

Supplemental disclosures of cash flow information:
Cash paid for income taxes	$	217	$	21
Cash paid for interest	$	12	$	37

See notes to consolidated financial statements.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Description of Business

Pro-Dex, Inc. (“Pro-Dex”, the “Company”, “we”, “us” or “our”) specializes in the design and manufacture of powered surgical and dental instruments used primarily in the orthopedic, spine, maxocranial facial and dental markets. Our Fineline Molds division, acquired in fiscal 2015, manufactures plastic injection molding for a variety of industries. Pro-Dex’s products are found in hospitals, dental offices, and medical engineering labs around the world.

In fiscal 2015, we acquired Huber Precision (“Huber”), a business that made custom machined parts. We made the investment to garner a wider customer base, but the sales to the customers that were serviced by Huber dwindled over time, such that activities have become immaterial. As a result, the intangibles relating to Huber were impaired during the first quarter of fiscal 2017.

Summary of Significant Accounting Policies

The summary of significant accounting policies presented below is designed to assist the reader in understanding our consolidated financial statements. Such financial statements and related notes are the representations of management, who is responsible for their integrity and objectivity. In the opinion of management, these accounting policies conform to accounting principles generally accepted in the United States of America (“GAAP”) in all material respects, and have been consistently applied in preparing the accompanying consolidated financial statements.

Principles of Consolidation

The consolidated financial statements include the accounts of the Company and its wholly owned subsidiaries, Pro-Dex Sunfish Lake, LLC and Pro-Dex Riverside, LLC, both Delaware limited liability companies formed by the Company in fiscal 2015. All significant inter-company accounts and transactions have been eliminated.

Revenue Recognition

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Returns of our product for credit are minimal; accordingly, we do not establish a reserve for product returns at the time of sale.

Estimated Losses on Product Development Services

Due to the complexity of many of the contracts we have undertaken, the cost estimation process requires significant judgment. It is based upon the knowledge and experience of our project managers, engineers, and finance professionals. Factors that are considered in estimating the cost of work to be completed and ultimate profitability of the fixed price product development portion of development and supply contracts include, among others, the nature and complexity of the work to be performed, availability and productivity of labor, the effect of change orders, the availability of materials, performance of subcontractors, and expected costs for specific regulatory approvals.

Warranties

The warranty accrual is based on historical costs of warranty repairs and expected future identifiable warranty expenses, and is included in accrued expenses in the accompanying consolidated balance sheets. Warranty expenses are included in cost of sales in the accompanying consolidated statements of operations. Changes in estimates to previously established warranty accruals result from current period updates to assumptions regarding repair costs and warranty return rates, and are included in current period warranty expense.

Cash and Cash Equivalents

We consider all highly liquid investments with an original maturity of ninety days or less to be cash equivalents. At June 30, 2017 and 2016 cash equivalents consisted of investments in money market funds.

Accounts Receivable and Deferred Costs

Trade receivables are stated at their original invoice amounts, less an allowance for doubtful portions of such accounts. Management determines the allowance for doubtful accounts based on facts and circumstances related to specific accounts and on historical experience related to the age of accounts. Trade receivables are written off when deemed uncollectible. Recoveries of trade receivables previously reserved are offset against the allowance when received.

Inventories

Inventories are stated at the lower of cost (first-in, first-out method) or market value. Cost includes materials, labor and manufacturing overhead related to the purchase and production of inventories. Reductions to estimated market value are recorded, and charged to cost of sales, when indicated based on a formula that compares on-hand quantities to both historical usage and estimated demand over the ensuing 12 months from the measurement date. On an on-going basis, we evaluate inventory for obsolescence and slow-moving items. This evaluation includes analysis of historical sales and usage, existing demand, as well as specific factors known to management. As of June 30, 2017, there was approximately $50,000 of inventory in-transit.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Investments

Long-lived Assets

We review the recoverability of long-lived assets, consisting of plant, equipment and leasehold improvements, when events or changes in circumstances occur that indicate carrying values may not be recoverable.

Plant, equipment and leasehold improvements are recorded at historical cost and depreciation is provided using the straight-line method over the following periods:


Equipment	Three to ten years
Leasehold improvements	Shorter of the lease term or the asset’s estimated useful life

Business Combinations

Goodwill & Intangibles

We recorded $353,000 of goodwill and $54,000 of trade name in conjunction with the asset purchase of Fineline Molds during the fiscal year ended June 30, 2015. Accordingly, subsequent to the measurement period described above under “Business Combinations,” we assess potential impairment of goodwill and trade name annually, or more frequently if there are events or changes in circumstances that may indicate potential impairment. Intangibles consist of legal fees incurred in connection with patent applications, capitalized software development costs, covenant not to compete, trade name, and customer lists including backlog. Certain of the patent costs are being amortized over a period of seven years, the estimated life of the product that is currently utilizing the patented technology. The remaining patent costs will be amortized over the estimated life of the product(s) that will be utilizing the technology, or expensed immediately in the event the patent office denies the issuance of the patent. The capitalized software development costs have been fully amortized as of June 30, 2016. Both the software development costs and corresponding accumulated amortization were offset during the first quarter of fiscal 2017. The covenant not to compete and customer list including backlog relate to assets acquired in conjunction with the purchase of Huber Precision and Fineline Molds and will be amortized over their estimated useful lives. The expense associated with the amortization of the covenants not to compete and customer list is recognized in selling expenses.

Notes Receivable

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Income Taxes

We recognize deferred tax assets and liabilities for temporary differences between the financial reporting basis and the tax basis of our assets and liabilities along with net operating losses and tax credit carryovers. Deferred tax assets at both June 30, 2017 and 2016 consisted primarily of basis differences related to research and development tax credit utilization, intangible assets, accrued expenses and inventories.

Significant management judgment is required in determining the provision for income taxes and the recoverability of deferred tax assets. Such determination is based on historical taxable income, with consideration given to estimates of future taxable income and the periods over which deferred tax assets will be recoverable. We record a valuation allowance against deferred tax assets to reduce the net carrying value to an amount that we believe is more likely than not to be realized. When we establish or reduce the valuation allowance against deferred tax assets, the provision for income taxes will increase or decrease, respectively, in the period such determination is made.

Shipping and Handling

Payments from customers for shipping and handling are included in net sales. Shipping expenses, consisting primarily of payments made to freight companies, are included in cost of sales.

Concentration of Credit Risk

Financial instruments that potentially subject us to credit risk consist principally of cash and trade receivables. We place our cash with major financial institutions. At June 30, 2017 and 2016, and throughout the fiscal years then ended, we had deposits in excess of federally insured limits. Credit sales are made to original equipment manufacturers and resellers throughout the world, and sales to such customers account for a substantial portion of our trade receivables. While such receivables are not collateralized, we evaluate their collectability based on several factors including customers’ payment histories.

Compensation Plans

We recognize compensation expense for all share-based awards made to employees and directors. The fair value of share-based awards is estimated at the grant date using the Black-Scholes option-pricing model. The portion that is ultimately expected to vest is recognized as compensation cost over the requisite service period using the straight-line single option method.

The determination of fair value using the Black-Scholes model is affected by our stock price as well as assumptions regarding a number of complex and subjective variables, including expected stock price volatility, risk-free interest rate, expected dividends, projected employee stock option exercise behaviors and forfeitures. We estimate stock price volatility based on two factors: (a) the measurement date (typically the grant date) and (b) the expected life of the option, which we calculate using the Staff Accounting Bulletin No. 107 simplified method.

Use of Estimates

The preparation of financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Our operations are affected by numerous factors including market acceptance of our products, changes in technologies, and new laws, government regulations and policies. We cannot predict what impact, if any, the occurrence of these or other events might have on our operations. Significant estimates and assumptions made by management include, but are not limited to, revenue recognition, the allowance for doubtful accounts, accrued warranty expense, inventory valuation, the carrying value of long-lived assets, and the recovery of deferred income tax assets.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Basic and Diluted Per Share Information

Basic per share amounts are computed on the basis of the weighted-average number of common shares outstanding during each period presented. Diluted per share amounts assume the exercise of all potential common stock equivalents, consisting solely of options to purchase common stock as discussed in Note 14, unless the effect of such exercise is to increase income, or decrease loss, per common share.

Fair Value Measurements

Fair value is measured based on the prices that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Fair value measurements are based on a three-tier hierarchy that prioritizes the inputs used to measure fair value. These tiers include: Level 1, defined as observable inputs such as quoted prices in active markets; Level 2, defined as inputs other than quoted prices in active markets that are either directly or indirectly observable; and Level 3, defined as unobservable inputs for which little or no market data exists, therefore requiring an entity to develop its own assumptions.

Cash and cash equivalents: The carrying value of cash and cash equivalents is considered to be representative of their fair values based on the short term nature of these instruments. As such, cash and cash equivalents are classified within Level 1 of the valuation hierarchy.

Investments: Investments consist of marketable equity securities of publicly held companies. As such, investments are classified within Level 1 of the valuation hierarchy.

Notes receivable: This investment is classified within Level 3 of the valuation hierarchy for purposes of evaluating potential impairment of these assets as of June 30, 2017. The fair value of the notes receivable was based upon the cost basis of the investment as well as our internal assessment of the value of the underlying technology.

Although the methods above may produce a fair value calculation that may not be indicative of the net realizable value or reflective of future fair values, we believe our valuation methods are appropriate.

Advertising

Advertising costs are charged to selling expense as incurred and amounted to $3,000 and $4,000 for the fiscal years ended June 30, 2017 and 2016, respectively.

Recent Accounting Standards

In May 2014, the FASB issued Accounting Standards Update ("ASU") 2014-09, "Revenue from Contracts with Customers," which outlines a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers and supersedes most current revenue recognition guidance, including industry-specific guidance. ASU 2014-09 requires an entity to recognize revenue depicting the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. ASU 2014-09 also requires enhanced revenue related disclosures. Application of the guidance in ASU 2014-09 is expected to require more judgment and estimates within the revenue recognition process compared to existing GAAP. ASU 2014-09 is required to be adopted by the Company in the first quarter of fiscal 2019. The Company expects to adopt the requirements of ASU 2014-09 using the modified retrospective adoption method. The Company also expects that disclosures related to revenue recognition including judgments made will increase compared to existing GAAP. The Company is currently evaluating the impact of the future adoption of ASU 2014-09 on its consolidated financial statements and does not currently expect significant changes in the timing of revenue recognition compared to existing GAAP.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Reclassifications

The short-term portion of deferred rent, in the amount of $79,000 as of June 30, 2016, has been reclassified to accrued liabilities to conform to the current period presentation. As described in more detail in Note 3 below, the assets sold relating to the Company’s Oregon Micro Systems (“OMS”) division have been reclassified as assets held for sale in accordance with applicable accounting guidance. These reclassifications had no impact on our consolidated net income.

Discontinued Operations

On January 27, 2017, we sold certain of the assets and the business operations of our OMS division located in Beaverton Oregon. We sold the business to our long time general manager of the division. The sale was structured as an asset sale as disclosed in a Form 8-K filed with the SEC on January 30, 2017. The aggregate sales price received was $636,000, and no liabilities other than warranty obligations were assumed by the buyer. As a result of the sale, this division has been classified as a discontinued operation in conformity with applicable accounting guidance and the assets that were sold have been reclassified as assets held for sale on our consolidated balance sheet as of June 30, 2016. Accordingly, unless otherwise indicated, OMS’s results have been reported as discontinued operations and removed from all financial discussions of continuing operations.

The following summarizes the carrying values of the assets sold as of June 30, 2016 (in thousands):


	June 30, 2016
Assets held for sale:
Inventory	$	209
Fixed assets		64
Prepaid expenses		5
Other assets		9
Assets held for sale	$	287

The divestiture was completed in support of raising capital to invest in our core medical device product development efforts.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Operating results of the OMS division are as follows (in thousands):


	Years Ended June 30,
	2017			2016
Revenues	$	715		$	969

Income (loss) from discontinued operations:
Gain on sale, net of taxes of $126,000	$	201		$	—
Income (loss) from discontinued operations, before taxes		68			(281	)
Income tax (expense) benefit		(26	)		—
Net income (loss) from discontinued operations	$	243		$	(281	)

Income from discontinued operations consists of direct revenues and direct expenses of the OMS business, including cost of revenues, as well as other fixed costs to the extent that such costs will be eliminated as a result of the sale. The Company historically did not allocate corporate overhead to this division. Additionally, the OMS division has historically been the only division that was significant enough to require segment disclosures and as such, effective with this divestiture, we no longer require segment disclosure as our business is currently run.

Goodwill and Indefinite-Lived Assets

Goodwill represents the excess of the purchase price over the fair value of identifiable net assets of acquired businesses. Indefinite-lived intangibles are intangible assets whose useful lives are indefinite in that their lives extend beyond the foreseeable horizon – that is there is no foreseeable limit on the period of time over which they are expected to contribute to the cash flows of the reporting entity. The Company accounts for these items in accordance with ASC 350 Intangibles – Goodwill and Other, which requires that impairment testing for goodwill is performed at least annually at the reporting unit level. A reporting unit is an operating segment or one level below an operating segment (also known as a component). We perform our annual impairment test as of January 31^st of each year. Goodwill is also tested for impairment between annual tests if an event occurs or circumstances change that would more likely than not reduce the fair value of a reporting unit below its carrying value.

The following table presents the changes in the carrying amount of the Fineline goodwill and trade name during fiscal 2016 (there were no changes to the carrying amounts during fiscal 2017 (in thousands):


	Goodwill			Trade name
Balance at July 1, 2015	$	353		$	54
Impairment charge		(241	)		(4	)
Balance at June 30, 2016 and 2017	$	112		$	50

The impairment test for goodwill uses a two-step approach. Step one compares the fair value of the reporting unit to its carrying value including goodwill. If the carrying value exceeds the fair value, there is a potential impairment and step two must be performed. Step two compares the carrying value of the reporting unit's goodwill to its implied value (i.e., the fair value of the reporting unit less the fair value of the unit's assets and liabilities, including identifiable intangible assets). If the carrying value of goodwill exceeds its implied value, the excess is recorded as an impairment.

Under Step 1 of the impairment test performed during fiscal 2016, the Company determined that the carrying value of the reporting unit including goodwill exceeded the fair value, requiring us to perform Step 2 of the goodwill impairment test to measure the amount of impairment loss, if any.

The Company then performed Step 2 of the impairment test, and determined the implied value of Fineline goodwill was $112,000, which was less than its carrying value and, as a result, the Company recognized a non-cash, pre-tax charge of $241,000 during the fiscal year ended June 30, 2016. Additionally, our analysis indicated that the estimated fair value of the trade name acquired was $50,000 and therefore we recognized an impairment charge of $4,000 during the fiscal year ended June 30, 2016. These impairment charges are included under the caption "Impairment of goodwill and intangible assets" in our consolidated statements of operations.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Although there was no impairment charge for goodwill or indefinite-lived intangibles during the fiscal year ended June 30, 2017, we did record an impairment charge in the amount of $113,00 relating to the customer list of Huber as described in Note 5 below.

The valuation methods utilized to value the long-lived assets and the goodwill discussed above are based on the amount and timing of expected future cash flows and growth rates and include a determination of an appropriate discount rate. The cash flows utilized in the discounted cash flow analyses were based on financial forecasts developed internally by management. Estimating future cash flows requires significant judgment and projections may vary from the cash flows eventually realized. Determining the fair value using a discounted cash flow method requires significant estimates and assumptions, including market conditions, discount rates, and long-term projections of cash flows. The Company’s estimates are based upon historical experience, current market trends, projected future volumes and other information. The Company believes that the estimates and assumptions underlying the valuation methodology are reasonable; however, different estimates and assumptions could result in a different estimate of fair value.

Composition of Certain Financial Statement Items

Investments

Investments are stated at market value and consist of the following (in thousands):


	June 30,
	2017		2016
Marketable equity securities	$	718	$	—

Investments at June 30, 2017 had an aggregate cost basis of $663,000 and gross unrealized gains of $55,000 and related tax expense of approximately $22,000 recorded in other comprehensive income.

Inventory

Inventory is stated at the lower of cost (first-in, first-out) or market and consists of the following (in thousands):


	June 30,
	2017		2016
Raw materials /purchased components	$	1,127	$	1,462
Work in process		747		818
Sub-assemblies /finished components		1,018		1,010
Finished goods		193		74
Total inventory	$	3,085	$	3,364

Equipment and Leasehold Improvements

Equipment and leasehold improvements consist of the following (in thousands):


	June 30,
	2017			2016
Office furnishings and fixtures	$	1,819		$	1,761
Machinery and equipment		5,289			4,796
Leasehold improvements		2,119			2,088
Total		9,227			8,645
Less: Accumulated depreciation and amortization		(7,798	)		(7,423	)
	$	1,429		$	1,222

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Depreciation expense for the years ended June 30, 2017 and 2016 amounted to $505,000 and $486,000, respectively. During the current fiscal year, fully depreciated assets in the amount of approximately $130,000 were either retired or sold. In conjunction with the sale of the OMS division during the fiscal year ended June 30, 2017, assets with a cost basis of $410,000 and accumulated amortization totaling $346,000 have been eliminated from the June 30, 2016 balances above, consistent with the discontinued operations presentation previously described.

Intangibles

Intangibles consist of the following (in thousands):


	June 30,
	2017			2016
Capitalized software development costs	$	—		$	73
Covenant not to compete		52			52
Trade name		50			50
Customer list and backlog		167			316
Patent-related costs		153			121
Total intangibles	$	422		$	612
Less accumulated amortization		(102	)		(161	)
	$	320		$	451

Amortization expense for the years ended June 30, 2017 and 2016 amounted to $50,000 and $117,000 respectively.

Capitalized software development costs relate to internally developed software, which was fully amortized during fiscal 2016 and both the software development costs and corresponding accumulated amortization were offset during the first quarter of fiscal 2017. Both the covenant not to compete and the customer list and backlog relate to assets acquired in conjunction with the business acquisitions described in Note 1 above and are being amortized over various periods not to exceed ten years. The customer backlog has been fully amortized and both the cost and related accumulated amortization have been offset during the current fiscal year. During the first quarter of fiscal 2017, we recognized an impairment charge for the remaining un-amortized customer list related to the Huber business in the amount of $113,000, as we do not expect there to be any significant future cash flows resulting from these customer relationships and have written-off the cost basis and accumulated amortization during the current fiscal year. The trade name relates exclusively to Fineline and has an indefinite life, subject to impairment loss assessment annually, or more frequently if certain conditions exist. Patent-related costs consist of legal fees incurred in connection with both patent applications and a patent issuance, and will be amortized over the estimated life of the product(s) that is or will be utilizing the technology, or expensed immediately in the event the patent office denies the issuance of the patent. Expected amortization expense for the next five fiscal years ending June 30, are as follows (in thousands):


	Amortization Expense
Fiscal Year:
2018	$	48
2019		55
2020		51
2021		46
2022		36
Thereafter		34
Total expected amortization	$	270

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Accrued Liabilities

Accrued liabilities consist of the following (in thousands):


	June 30,
	2017		2016
Warranty	$	159	$	365
Payroll and related items		417		443
Accrued bonuses		390		—
Accrued legal and professional fees		151		60
Deferred rent		68		79
Accrued sales, use and excise taxes		9		7
Accrued losses on development contracts		—		28
Accrued inventory in transit		52		11
Other		98		83
	$	1,344	$	1,076

Warranty Accrual

Information relating to the accrual for warranty costs for the years ended June 30, 2017 and 2016 is as follows (in thousands):


	June 30,
	2017			2016
Balance at beginning of year	$	365		$	261
Accruals during the year		316			350
Change in estimates of prior period accruals		(224	)		(154	)
Warranty amortization		(298	)		(92	)
Balance at end of year	$	159		$	365

Warranty expense relating to new product sales and changes to estimates was $92,000 and $196,000, respectively, for the fiscal years ended June 30, 2017 and 2016.

Income Taxes

The provision for income tax expense (benefit) from continuing operations consists of the following amounts (in thousands):


	Years Ended June 30,
	2017			2016
Current:
Federal	$	34		$	11
State		40			14
Deferred:
Federal		(1,263	)		—
State		(900	)		—
Income tax expense (benefit)	$	(2,089	)	$	25

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

The effective income tax rate on loss from continuing operations differs from the United States statutory income tax rates for the reasons set forth in the table below (in thousands, except percentages).


	Years Ended June 30,
	2017						2016
	Amount			Percent Pretax Income			Amount			Percent Pretax Income
Income (loss) from continuing operations before income taxes	$	2,752			100	%	$	1,128			100	%

Computed “expected” income tax expense (benefit) on income (loss) from continuing operations before income taxes	$	936			34	%	$	384			34	%
State tax, net of federal benefit		270			10	%		9			1	%
Tax incentives		(36	)		(1	%)		(133	)		(12	%)
Change in valuation allowance		(3,252	)		(118	%)		(237	)		(21	%)
Permanent differences		—			—			—			—
State income tax rate adjustment		—			—			—			—
Other		(7	)		(1	%)		2			—
Income tax expense (benefit)	$	(2,089	)		(76	%)	$	25			2	%

Deferred income taxes reflect the net effects of loss and credit carryforwards and temporary differences between the carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Significant components of our deferred tax assets and liabilities for federal and state income taxes are as follows (in thousands):


	June 30,
	2017			2016
Deferred tax assets:
Federal & State NOL carryforward	$	181		$	1,144
Research & other credits		1,832			1,790
Reserves and accruals		180			337
Inventory		446			432
Other intangibles		178			237
Goodwill		77			89
Other		1			5
Total gross deferred tax assets	$	2,895		$	4,034
Less: valuation allowance		(89	)		(3,773	)
Total deferred tax assets	$	2,806		$	261


	June 30,
	2017			2016
Deferred tax liabilities:
Property and equipment, principally due to differing depreciation methods	$	(438	)	$	(261	)
Deferred state tax		(295	)		—
Other intangibles		(2	)		—
Other		(23	)		—
Total gross deferred tax liabilities		(758	)		(261	)
Net deferred tax assets	$	2,048		$	—

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Realization of our deferred tax assets is dependent upon future earnings, if any, the timing and amount of which are uncertain. As of June 30, 2017, our deferred tax assets were primarily the result of Federal and State tax credit carryforwards. For the year ended June 30, 2017, there was a decrease in the valuation allowance in the amount of $3.7 million, primarily based upon management’s reassessment of the amount of our deferred tax assets that are more likely than not to be realized. During the year ended June 30, 2017, in part, because in the current year we achieved three years of cumulative pre-tax income, and have forecasted future earnings, management concluded that it is more likely than not that substantially all of its deferred tax assets are realizable, and therefore reduced the valuation allowance accordingly.

As of June 30, 2017, we did not have any net operating losses for federal income tax purposes. As of June 30, 2017 we have state net operating loss carry forwards of approximately $2,146,000 which will begin to expire in 2026. Federal research and development and alternative minimum tax credit carry forwards at June 30, 2017 amount to $1,111,000, and begin to expire in 2027. State tax research credit carry forwards at June 30, 2017 amount to $721,000, the majority of which do not expire.

As of June 30, 2017, we have accrued $446,000 of unrecognized tax benefits related to federal and state income tax matters that would reduce the Company’s income tax expense if recognized. If we are eventually able to recognize our uncertain tax positions, our effective tax rate would be reduced. Any adjustment to our uncertain tax positions would result in an adjustment of our tax credit carryforwards rather than resulting in a cash outlay.

Information with respect to our accrual for unrecognized tax benefits is as follows (in thousands):


	June 30,
	2017			2016
Unrecognized tax benefits:
Beginning balance	$	446		$	399
Additions based on federal tax positions related to the current year		18			15
Additions based on state tax positions related to the current year		—			13
Additions for tax positions of prior years		1			19
Reductions for tax positions of prior years		(19	)		—
Ending balance	$	446		$	446

Although it is reasonably possible that certain unrecognized tax benefits may increase or decrease within the next twelve months due to tax examinations, settlement activities, expirations of statute of limitations, or the impact on recognition and measurement considerations related to the results of published tax cases or other similar activities, we do not anticipate any significant changes to unrecognized tax benefits over the next twelve months.

We recognize accrued interest and penalties related to unrecognized tax benefits in income tax expense when applicable. As of June 30, 2017, no interest or penalties applicable to our unrecognized tax benefits have been accrued since we have sufficient tax attributes available to fully offset any potential assessment of additional tax.

We are subject to U.S. federal income tax, as well as income tax of multiple state tax jurisdictions. We are currently open to audit under the statute of limitations by the Internal Revenue Service for the years ended June 30, 2014 and later. However, because of net operating losses and research credit carryovers, substantially all of our tax years are open to audit.

Investment in Ramsey Property and Related Notes Receivable

In November 2014, the Company purchased two promissory notes through a Loan Purchase and Sale Agreement in the amount of $1.2 million. The promissory notes were cross-collateralized and originally secured by (collectively, the “Collateral”), among other things, real property consisting of 2.3 acres of land and an approximate 30,000 square foot industrial building and a security interest in substantially all of the assets of Riverside Manufacturing, Inc. (“Riverside”) (consisting primarily of machine shop equipment and accounts receivable).

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

During the third quarter of fiscal 2015, we entered into forbearance agreements with Riverside whereby we agreed to forbear from enforcing our rights under the promissory notes until July 31, 2015. Additionally, we entered into a revolving loan agreement, whereby we agreed to advance Riverside from time-to-time up to an aggregate amount of $200,000 at any time prior to July 31, 2015. During the fourth quarter of fiscal 2015, we amended the revolving loan agreement to provide for advances to Riverside of up to an aggregate amount of $300,000 under a Revolving Loan Modification Agreement.

Additionally, during the fourth quarter of fiscal 2015, we entered a settlement agreement such that we received the deed to the land and building located in Ramsey, Minnesota (the “Ramsey Property”) which had previously been held as security for the notes receivable. The notes were considered impaired because we did not believe the contractual payments would be collected pursuant to contract terms.

On September 22, 2015 we sent Riverside a proposal to accept the collateral in full satisfaction of Riverside’s debt. On October 13, 2015, title to the collateral transferred to the Company by operation of law. Therefore, on October 13, 2015, we took possession of all assets secured by the revolving loan agreement and promissory notes and Riverside ceased to operate.

During fiscal 2016 we sold the Ramsey Property for an aggregate purchase price of $1,653,000, collecting $1,441,000 upon close of escrow. Additionally, during the second and third quarter of fiscal 2016 we liquidated the machine shop equipment and collected some accounts receivable that served as Collateral to the promissory notes in the gross amount of $529,000. Therefore, during fiscal 2016 we recorded a gain on the sale of Investment in Ramsey in the amount of $340,000, which included a final accrual in the aggregate amount of $108,000 related to $86,000 to be released from escrow upon completion of voluntary foreclosure proceedings and $22,000 due from our equipment liquidator. The $86,000 was released from escrow during fiscal 2017 and the $22,000 was collected in the fourth quarter of fiscal 2016.

Notes Receivable

On April 19, 2017 (the “Closing Date”), we entered into a Secured Convertible Promissory Note (the “Promissory Note”) with Monogram Orthopaedics Inc. (“Monogram” or the “Borrower”). Monogram is a New York based medical device start-up specializing in precision, patient specific orthopedic implants.

Pursuant to the terms of the Promissory Note, the Company advanced Monogram $450,000, on the Closing Date, and upon Monogram’s satisfaction of certain milestones, as determined by us in good faith, the Company will advance an additional $350,000. The Promissory Note bears interest at 4% per annum calculated on a 360-day year and matures on April 19, 2019, upon which the outstanding principal and accrued interest will become due and payable if not converted to Borrower’s common stock. As of the date of this report, Monogram is still completing certain milestones and we have agreed to extend the original three month milestone completion date. We currently expect to advance the additional $350,000 within the next three months.

10.

Notes Payable and Financing Transactions

Farmers & Merchants Bank of Long Beach

On April 19, 2017 we entered into a Business Loan Agreement (the “Loan Agreement”), dated effective March 28, 2017, with Farmers & Merchants Bank of Long Beach, a California corporation, providing for a $500,000 revolving loan facility (the “Revolving Loan Facility”). The Revolving Loan Facility is secured by substantially all of the assets of the Company and bears interest at prime plus 2 percent (6.25%) and matures on March 28, 2018. As of June 30, 2017, we have not borrowed against this Revolving Loan Facility.

Summit Financial Resources LP

On September 9, 2015 we entered into a Loan and Security Agreement (the “Summit Loan”) with Summit Financial Resources LP, whereby we could borrow up to $1.0 million against our eligible receivables, as defined in the agreement. Borrowed funds bore interest at a rate of prime plus 2 percent (6.25%), and incurred an additional administrative fee of 0.7 percent on the monthly average outstanding balance. The Summit Loan had an initial period of 18 months. During the fiscal years ended June 30, 2017 and 2016 we borrowed $600,000 and $1.7 million, respectively, on a revolving basis, under the Summit Loan, which amounts were paid in full by June 30, 2017 and 2016. On March 9, 2017, we terminated the Summit Loan in accordance with its terms. Therefore as of June 30, 2017 we no longer present amounts due from factor.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Jules & Associates

On July 21, 2016, we entered a master equipment lease agreement with Jules and Associates, Inc. to lease a specific machine used in our inspection process. The cost of the equipment was approximately $105,000 and the lease provides for 36 monthly payments in the amount of $3,121, as well as interim rent in the amount of $7,388. The lease was subsequently assigned to Hitachi Capital America Corporation. The balance owed on the lease as of June 30, 2017 is approximately $74,000.

Fineline Molds

In conjunction with our acquisition of the assets of Fineline, we issued a promissory note to Fineline in the amount of $100,000 which bears interest at 4% per annum and requires sixteen equal quarterly payments of principal and accrued interest in the amount of $6,794. The note is secured by all of the assets acquired by us from Fineline. The balance owed on the note as of June 30, 2017 and June 30, 2016 was approximately $46,000 and $70,000 respectively.

Fortitude Income Funds

The Company borrowed $500,000 from Fortitude Income Funds, LLC (“Fortitude”) under a promissory note dated September 8, 2015. The loan bore interest at 12 percent per annum, contained a loan origination fee of $15,000 plus expenses, and required monthly interest only payments until its maturity originally scheduled on March 15, 2016. We repaid the loan in full on February 22, 2016.

11.

Commitments and Contingencies

Leases

We lease our office, production and warehouse facility in Irvine, California under an agreement that expires in April 2018. We are currently in negotiations with our landlord to renew our lease, but there is no guarantee that we will successfully conclude these negotiations. We leased our former Beaverton, Oregon office under an agreement that expired in July 2017. Upon the sale of the OMS division, we assigned the Beaverton lease to OMS Motion, Inc. and received sublease income in the amount of $43,000 during fiscal 2017, which was recorded as a reduction to rent expense. Both leases require us to pay insurance, taxes, and other expenses related to the leased space.

Additionally, during the fiscal year ended June 30, 2015 we entered a lease in conjunction with the acquisition of Fineline located in San Dimas, California, which has since been renewed and currently expires in February 2019. Rent expense in fiscal 2017 and 2016 was $515,000 and $561,000, respectively. Minimum lease payments for future fiscal years ending June 30 are as follows (in thousands):


	Operating Leases
Fiscal Year:
2018	$	395
2019		23
Total minimum lease payments	$	418

Compensation Arrangements

Retirement Savings 401(k) Plan

The Pro-Dex, Inc. Retirement Savings 401(k) Plan (the “401(k) Plan”) is a defined contribution plan we administer that covers substantially all our employees and is subject to the provisions of the Employee Retirement Income Security Act of 1974, as amended. Employees are eligible to participate in the 401(k) Plan when they have attained 19 years of age and then can enter into the 401(k) Plan on the first day of each calendar quarter. Participants are eligible to receive non-discretionary Pro-Dex matching contributions of 25% of their contributions up to 5% of eligible compensation. For the fiscal years ended June 30, 2017 and 2016, we recognized compensation expense amounting to $53,000 and $68,000, respectively, in connection with the 401(k) Plan.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Legal Matters

In September 2015, Pro-Dex Sunfish Lake, LLC (“PDSL”) a subsidiary of the Company foreclosed its lien against the assets of Riverside (see Note 8). After the foreclosure, Scott Robertson (the former president of Riverside), Riverside and Heron Enterprises, LLC, an affiliated entity, asserted claims of breach of contract, fraudulent inducement and wrongful self-help eviction among others, against PDSL and another subsidiary of the Company, Pro-Dex Riverside LLC (“PDR”). PDSL and PDR asserted various claims, including slander of title, fraudulent misrepresentation, conversion and theft against one or more of those parties, in turn. In October 2016, the parties filed lawsuits against one another asserting the aforementioned claims. On February 8, 2017, a hearing was held on PDSL and PDR’s request for dismissal of several of Robertson et al’s claims, which the court dismissed effective May 8, 2017. We are unable to quantify the value of the remaining respective claims at this time, as the damages are unspecified in the pleadings. However, prior to the filing of the lawsuits, Mr. Robertson requested payment of $250,000 to fully settle the matter and later called our management directly requesting a payment of $170,000. We proposed a mutual release of all claims to settle this dispute and the court has scheduled an October 6, 2017 hearing to review the matter, as it is our position that Robertson et al. agreed to the settlement. While we believe that there is a reasonable likelihood that PDSL and PDR would prevail should this matter go to trial, there can be no assurances that we would prevail.

Additionally, two former employees have asserted claims of wrongful termination and unpaid commission earnings on March 20, 2017 and April 21, 2017, respectively. The former employees were seeking payments of $100,000 and $41,000, respectively. As we have not heard back from the claimant relating to wrongful termination after sending our legal response, we assume that this matter has concluded. We settled the matter relating to the claimant seeking unpaid commission during the fourth quarter of fiscal 2017. We paid this former employee $30,000 to fully satisfy the matter.

In addition to the matters described above we are from time to time a party to various legal proceedings incidental to our business. There can be no certainty, however, that we may not ultimately incur liability or that such liability will not be material and adverse.

12.

Share-Based Compensation

Stock Option Plans

Through June 2014 we had two equity compensation plans, the Second Amended and Restated 2004 Stock Option Plan (the “Employee Stock Option Plan”) and the Amended and Restated 2004 Directors’ Stock Option Plan (the “Directors’ Stock Option Plan”) (collectively, the “Former Stock Option Plans”). There was no share-based compensation expense for the fiscal year ended June 30, 2017 as all outstanding options under the Former Stock Option Plans are fully vested. Share-based compensation expense year ended June 30, 2016 was $2,000 relating to stock option plans. The Employee Stock Option Plan and Director’s Stock Option Plan were terminated in June 2015 and September 2014, respectively.

In September 2016, our Board approved the establishment of the 2016 Equity Incentive Plan, which was approved by our shareholders at the November 29, 2016 Annual Meeting. The 2016 Equity Incentive Plan provides for the award of up to 1,500,000 shares of the Company’s common stock in the form of incentive stock options, nonstatutory stock options, stock appreciation rights, restricted shares, restricted stock units, performance awards and other stock-based awards. As of June 30, 2017, no awards have been granted under the 2016 Equity Incentive Plan.

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Stock Options

There were no stock options granted during the fiscal years ended June 30, 2017 and 2016. As of June 30, 2017, there was no unrecognized compensation cost under the Stock Option Plans as all outstanding stock options are fully vested. The intrinsic value of stock options outstanding and exercisable at June 30, 2017 was approximately $116,000.

The following is a summary of stock option activity under the Option Plans for the years ended June 30, 2017 and 2016:


	Outstanding Options
	Number of Shares			Weighted-Average Exercise Price
Balance, July 1, 2015		106,668		$	2.41
Options granted		—			—
Options canceled or expired		(8,334	)		7.65
Options exercised		(7,500	)		2.14
Balance, July 1, 2016		90,834		$	1.95
Options granted		—			—
Options canceled or expired		—			—
Options exercised		(33,834	)		2.07
Balance, June 30, 2017		57,000		$	1.88
Stock Options Exercisable at June 30, 2017		57,000		$	1.88

Employee Stock Purchase Plan

In September 2014, our Board approved the establishment of an Employee Stock Purchase Plan (the “ESPP”). The ESPP conforms to the provisions of Section 423 of the Internal Revenue Code, has coterminous offering and purchase periods of six months, and bases the pricing to purchase shares of our common stock on a formula so as to result in a per share purchase price that approximates a 15% discount from the market price of a share of our common stock at the end of the purchase period. The Board of Directors also approved the provision that shares formerly reserved for issuance under the Former Stock Option Plans in excess of shares issuable pursuant to outstanding options, aggregating 704,715 shares, be reserved for issuance pursuant to the ESPP. The ESPP was approved by our shareholders at the December 3, 2014 Annual Meeting. On February 2, 2015, the Company filed a Registration Statement on Form S-8 registering the 704,715 shares issuable under the ESPP under the Securities Act of 1933.

During the fiscal years ended June 30, 2017 and 2016 shares totaling 3,794 and 5,596 were purchased respectively, and allocated to participating employees based upon their contributions at weighted average prices of $4.74 and $2.32, respectively. On a cumulative basis, since the inception of the ESPP plan, employees have purchased a total of 9,390 shares. During the fiscal year ended June 30, 2017 and 2016, we recorded stock compensation expense in the amount of $3,000 and $2,000, respectively, relating to the ESPP.

13.

Major Customers & Suppliers

Customers that accounted for sales in excess of 10% of our total sales in either of fiscal year 2017 or 2016, is as follows (in thousands, except percentages):


	Years Ended June 30,
	2017					2016
	Amount		Percent of Total			Amount		Percent of Total
Total revenue	$	21,943		100	%	$	19,189		100	%

Customer concentration:
Customer 1	$	10,939		50	%	$	4,999		26	%
Customer 2		1,523		7	%		3,630		19	%
Customer 3		1,566		7	%		2,855		15	%
Total	$	14,028		64	%	$	11,484		60	%

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Information with respect to accounts receivable from those customers whom comprised more than 10% of our gross accounts receivable at either June 30, 2017 or June 30, 2016, is as follows (in thousands, except percentages):


	June 30, 2017				June 30, 2016
Total gross accounts receivable, including amounts due from factor	$	3,541	100	%	$	2,908	100	%

Customer concentration:
Customer 1	$	2,187	62	%	$	850	29	%
Customer 3		554	16	%		573	20	%
Total	$	2,741	78	%	$	1,423	49	%

During fiscal 2017 and 2016, we had one supplier that accounted for 10 percent and 11 percent of total purchases, respectively. Accounts payable due to this same significant supplier represented 12 percent and 3 percent of total accounts payable as of June 30, 2017 and 2016, respectively.

14.

Net Income (Loss) Per Share

We calculate basic earnings (loss) per share by dividing net income (loss) by the weighted average number of common shares outstanding during the reporting period. Diluted earnings (loss) per share reflects the effects of potentially dilutive securities. The summary of the basic and diluted earnings per share calculations for the years ended June 30, 2017 and 2016 is as follows (in thousands, except per share data):


	Years Ended June 30,
	2016		2016
Basic:
Income from continuing operations	$	4,841	$	1,103
Weighted average shares outstanding		4,040		4,141
Basic earnings per share from continuing operations	$	1.20	$	0.27
Income (loss) from discontinued operations	$	243	$	(281	)
Weighted average shares outstanding		4,040		4,141
Basic earnings (loss) per share from discontinued operations	$	0.06	$	(0.07	)
Net income	$	5,084	$	822
Weighted average shares outstanding		4,040		4,141
Basic earnings per share	$	1.26	$	0.20
Diluted:
Income from continuing operations	$	4,841	$	1,103
Weighted average shares outstanding		4,040		4,141
Effect of dilutive securities – stock options		37		32
Weighted average shares used in calculation of diluted earnings per share		4,077		4,173
Diluted earnings per share from continuing operations	$	1.19	$	0.27
Income (loss) from discontinued operations	$	243	$	(281	)
Weighted average shares used in calculation of diluted earnings per share		4,077		4,141
Diluted earnings (loss) per share from discontinued operations	$	0.06	$	(0.07	)
Net income	$	5,084	$	822
Weighted average shares used in calculation of diluted earnings per share		4,077		4,173
Diluted earnings per share	$	1.25	$	0.20

PRO-DEX, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

15.

Common Stock

Share Repurchase Program

In September, 2013 our Board approved a share repurchase program authorizing the Company to repurchase up to 750,000 shares of our common stock. In accordance with, and as part of, this share repurchase program, our Board has approved the adoption of several prearranged share repurchase plans intended to qualify for the safe harbor Rule 10b5-1 under the Securities Exchange Act of 1934, as amended (“10b5-1 Plan” or “Plan”). During the quarter ended September 30, 2016, our Board approved a 10b5-1 Plan, which became effective on September 8, 2016 and terminated on the earlier of September 8, 2017 or when and if the maximum shares are repurchased. During the quarter ended December 31, 2016, the Investment Committee of our Board approved an additional concurrently running 10b5-1 Plan, which became effective on December 8, 2016 and terminates on the earlier of December 8, 2017 or when and if the maximum shares are repurchased. During the fiscal year ended June 30, 2017, we repurchased 63,496 shares at an aggregate cost of $312,000, inclusive of fees under the Plans. On a cumulative basis, we have repurchased a total of 232,957 shares under the share repurchase program at an aggregate cost of $920,000. All repurchases under the 10b5-1 Plans were administered through an independent broker. In February, 2017 our Board terminated the two effective 10b5-1 Plans in conjunction with the approval of the Company’s At The Market Offering Agreement (“ATM” or “ATM Agreement”) further described below.

At The Market Offering Agreement

In February 2017, our Board approved an ATM Agreement with Ascendiant Capital Markets, LLC (“Ascendiant”). The ATM Agreement allows the Company to sell shares of its common stock pursuant to specific parameters defined by the Company as well as those defined by the SEC and the ATM Agreement. During the fiscal year ended June 30, 2017 we have sold 8,276 shares of common stock and raised net proceeds of $48,000. The proceeds collected were accounted for as a reduction of the prepaid expenses relating to establishing the ATM. The ATM allows for quick and agile sales of our common stock to interested investors and provides an opportunity to raise additional capital for working capital requirements or to fund strategic opportunities that may present themselves from time to time.

16.

Subsequent Events

From July 7, 2017 through September 7, 2017, we have sold 227,319 shares of common stock and raised net proceeds of approximately $1.5 million and paid fees of approximately $46,000 to Ascendiant under our ATM. We expect to continue to sell shares of common stock in the future if our stock price continues to increase. As of September 12, 2017, we believe we are in final negotiations with our landlord relating to an amendment of our Irvine, California lease. Once this amendment is executed, we will timely file a Form 8-K reporting the amendment.

ITEM 9.

CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

ITEM 9A.

CONTROLS AND PROCEDURES

Our Chief Executive Officer and Chief Financial Officer (our principal executive officer and principal financial officer) have concluded, based on their evaluation as of June 30, 2017, that the design and operation of our “disclosure controls and procedures” (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (“Exchange Act”)) are effective at a reasonable assurance level to ensure that information required to be disclosed by us in the reports filed or submitted by us under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms, including to ensure that information required to be disclosed by us in the reports we file or submit under the Exchange Act is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Our management is responsible for establishing and maintaining adequate “internal control over financial reporting” (as defined in Rule 13a-15(f) under the Exchange Act). Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework set forth in the 2013 Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in May 2013. Based on this evaluation, our management concluded that our internal control over financial reporting was effective as of June 30, 2017.

Our internal control over financial reporting is supported by written policies and procedures, that:


	(1)	pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;

	(2)	provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of our Company are being made only in accordance with authorizations of our management and directors; and

	(3)	provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risks that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to rules of the SEC that apply to smaller reporting companies that permit us to provide only management’s attestation in this annual report.

During the quarter ended June 30, 2017, there were no changes in the Company’s internal controls over financial reporting (as defined in Rule 13a-15(f) and 15d-15(f) under the Exchange Act) that have materially affected, or are reasonably likely to materially affect, the Company’s internal controls over financial reporting.

ITEM 9B.

OTHER INFORMATION

None.

PART III

ITEM 10.

DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this Item is incorporated herein by reference to our definitive Proxy Statement, which will be filed within 120 days of June 30, 2017, and delivered to stockholders in connection with our 2017 annual meeting of shareholders.

ITEM 11.

EXECUTIVE COMPENSATION

ITEM 12.

SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

ITEM 13.

CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

ITEM 14.

PRINCIPAL ACCOUNTING FEES AND SERVICES

PART IV

ITEM 15.

EXHIBITS, FINANCIAL STATEMENT SCHEDULES


(a)(3)	Exhibits

Reference is made to the Exhibit Index beginning on page 51 of this report.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, on April 9, 2018.


	PRO-DEX, INC.

	By:	Richard L. Van Kirk
	Richard L. Van Kirk
	President, Chief Executive Officer and Director
	(Principal Executive Officer)

POWER OF ATTORNEY

We, the undersigned directors and officers of Pro-Dex, Inc., do hereby constitute and appoint Richard L. Van Kirk, as our true and lawful attorney-in-fact and agent with power of substitution, to do any and all acts and things in our name and behalf in our capacities as directors and officers and to execute any and all instruments for us and in our names in the capacities indicated below, which such attorney-in-fact and agent may deem necessary or advisable to enable said corporation to comply with the Securities Exchange Act of 1934, as amended, and any rules, regulations and requirements of the Securities and Exchange Commission, in connection with this Annual Report on Form 10-K, including specifically but without limitation, power and authority to sign for us or any of us in our names in the capacities indicated below, any and all amendments hereto; and we do hereby ratify and confirm all that said attorney-in-fact and agent, shall do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.


Signature		Title	Date

/s/ Richard L. Van Kirk Richard L. Van Kirk		President, Chief Executive Officer, and Director (Principal Executive Officer)	April 9, 2018

/s/ Alisha K. Charlton Alisha K. Charlton		Chief Financial Officer (Principal Financial Officer)	April 9, 2018

* Nicholas J. Swenson		Chairman of the Board, Director	April 9, 2018

* Raymond E. Cabillot		Director	April 9, 2018

* William J. Farrell III		Director	April 9, 2018

* David C. Hovda		Director	April 9, 2018

*By:	/s/ Richard L. Van Kirk	Director	April 9, 2018
	Richard L. Van Kirk, Attorney in Fact

INDEX TO EXHIBITS


Exhibit No.		Description

3.1		Articles of Incorporation (incorporated herein by reference to Exhibit 3.1 to the Company’s Form 8-K filed April 23, 2007).
3.2		Articles of Amendment to Articles of Incorporation (incorporated herein by reference to Exhibit 3.1 to the Company’s Form 8-K filed December 5, 2007).
3.3		Articles of Amendment to Articles of Incorporation (incorporated herein by reference to Exhibit 3.1 to the Company’s Form 8-K filed June 18, 2010).
3.4		Amended and Restated Bylaws, dated January 31, 2011 (incorporated herein by reference to Exhibit 3.1 to the Company’s Form 8-K filed February 4, 2011)
10.1*		Second Amended and Restated 2004 Stock Option Plan (incorporated herein by reference to Exhibit 4.1 to the Company’s Form S-8 filed February 15, 2012).
10.2*		Amended and Restated 2004 Directors Stock Option Plan (incorporated herein by reference to Exhibit 4.2 to the Company’s Form S-8 filed February 15, 2012).
10.3*		Form of Indemnification Agreement for directors and certain officers (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed October 29, 2008).
10.4		Lease agreement with Irvine Business Properties, dated August 3, 2007 (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed August 23, 2007).
10.5		First Amendment To Lease – July 2013 by and between Irvine Business Properties and Pro-Dex, Inc., dated effective July 1, 2013 (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed July 17, 2013).
10.6		Loan Purchase and Sale Agreement, dated November 21,2014, among the Bank, Pro-Dex Sunfish Lake, LLC, Heron Enterprises, LLC and Scott Robertson (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed November 28, 2014)
10.7		Promissory Notes, as of various dates issued by Riverside Manufacturing, Inc. in favor of the Bank (incorporated herein by reference to Exhibit 10.2 to the Company’s Form 8-K filed November 28, 2014)
10.8		Promissory Notes, as of various dates issued by Sheldon A. Mayer, LLC in favor of the Bank (incorporated herein by reference to Exhibit 10.3 to the Company’s Form 8-K filed November 28, 2014)
10.9		Debt Purchase Agreement, dated November 21, 2014, among Pro-Dex Sunfish Lake, LLC, Heron Enterprises, LLC and Scott C. Robertson (incorporated herein by reference to Exhibit 10.4 to the Company’s Form 8-K filed November 28, 2014)
10.10		Promissory Note, dated September 20, 2013, issued by Riverside Manufacturing, Inc. in favor of Heron Enterprises, LLC (incorporated herein by reference to Exhibit 10.5 to the Company’s Form 8-K filed November 28, 2014)
10.11		Combination Amended and Restated Convertible Promissory Note, dated August 15, 2012 issued by Riverside Manufacturing Inc. in favor of Heron Enterprises, LLC (incorporated herein by reference to Exhibit 10.6 to the Company’s Form 8-K filed November 28, 2014)
10.12		Employment Agreement, dated November 21, 2014, between Pro-Dex Riverside, LLC and Scott C. Robertson (incorporated herein by reference to Exhibit 10.7 to the Company’s Form 8-K filed November 28, 2014)
10.13		Asset Purchase Agreement dated December 8, 2014 by and between Pro-Dex, Inc., Fineline Molds and the shareholders of Fineline Molds (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed December 11, 2014)
10.14		Heron Forbearance Agreement, effective February 3, 2015, by and between Riverside Manufacturing, Inc. and Pro-Dex Sunfish Lake, LLC (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed March 9, 2015)
10.15		Riverside Forbearance Agreement, effective February 3, 2015, by and between Riverside Manufacturing, Inc. and Pro-Dex Sunfish Lake, LLC (incorporated herein by reference to Exhibit 10.2 to the Company’s Form 8-K filed March 9, 2015)


10.16		Revolving Loan Agreement, effective February 3, 2015, by and between Riverside Manufacturing, Inc. and Pro-Dex Sunfish Lake, LLC (incorporated herein by reference to Exhibit 10.3 to the Company’s Form 8-K filed March 9, 2015)
10.17		First Amendment to Employment Agreement, effective February 4, 2015, by and between Pro-Dex Riverside, LLC and Scott C. Robertson (incorporated herein by reference to Exhibit 10.4 to the Company’s Form 8-K filed March 9, 2015)
10.18		Deed and Settlement Agreement, dated May 7, 2015, by and among Sheldon A. Mayer, LLC, Sheldon A. Mayer and Pro-Dex Sunfish Lake, LLC (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed May 13, 2015)
10.19*		Pro-Dex, Inc. Amended and Restated Employee Severance Policy effective as of September 16, 2014 (incorporated herein by reference to Exhibit 10.5 to the Company’s Form 10-Q filed May 14, 2015)
10.20		Loan and Security Agreement, dated September 9, 2015, between Summit Financial Resources, L.P. and Pro-Dex, Inc. (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed on September 14, 2015)
10.21		Intercreditor Agreement, dated September 9, 2015, among Summit Financial Resources, L.P., Fineline Molds and Pro-Dex, Inc. (incorporated herein by reference to Exhibit 10.2 to the Company’s Form 8-K filed on September 14, 2015)
10.22		Promissory Note, dated September 8, 2015, made by Pro-Dex Sunfish Lake, LLC in favor of Fortitude Income Funds, LLC (incorporated herein by reference to Exhibit 10.3 to the Company’s Form 8-K filed on September 14, 2015)
10.23		Combination Mortgage, Security Agreement and Fixture Financing Statement, dated September 8, 2015, made by Pro-Dex Sunfish Lake, LLC in favor of Fortitude Income Funds, LLC (incorporated herein by reference to Exhibit 10.4 to the Company’s Form 8-K filed on September 14, 2015)
10.24		Assignment of Leases and Rents, dated September 8, 2015, made by Pro-Dex Sunfish Lake, LLC favor of Fortitude Income Funds, LLC (incorporated herein by reference to Exhibit 10.5 to the Company’s Form 8-K filed on September 14, 2015)
10.25		Revolving Loan Agreement Modification Agreement, effective June 11, 2015, by and between Riverside Manufacturing, Inc. and Pro-Dex Sunfish Lake, LLC (incorporated herein by reference to Exhibit 10.42 to the Company’s Form 10-K filed on September 17, 2015)
10.26		Receipt for Earnest Money Deposit and Real Estate Purchase Contract, including Addendum to Real Estate Purchase Contract, dated January 6, 2016, by and between MO Real Estate, LLC and Pro-Dex Sunfish Lake, LLC (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed on January 8, 2016)
10.27		Amendment to Real Estate Purchase Contract, dated February 19, 2016, by and between MO Real Estate, LLC and Pro-Dex Sunfish Lake, LLC (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed on February 25, 2016)
10.28		Agreement for Sale and Purchase of Business Assets dated January 27, 2017 by and between Pro-Dex, Inc. and OMS Motion, Inc. (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed on January 30, 2017)
10.29		Noncompetition and Nonsolicitation Agreement dated January 27,2017 by and between Pro-Dex, Inc. and OMS Motion, Inc. (incorporated herein by reference to Exhibit 10.2 to the Company’s Form 8-K filed on January 30, 2017)
10.30		At the Market Offering Agreement, dated February 16, 2017 by and between Pro-Dex, Inc. and Ascendiant Capital Markets LLC (incorporated herein by reference to Exhibit 1.1 to the Company’s Form 8-K filed on February 16, 2017)
10.31		Business Loan Agreement, dated March 28, 2017 between Pro-Dex, Inc. and Farmers and Merchants Bank of Long Beach (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed on April 21, 2017)
10.32^∆		Secured Convertible Promissory Note, dated April 19, 2017 by and between Pro-Dex, Inc. and Monogram Orthopaedics Inc. (incorporated herein by reference to Exhibit 10.1 to the Company’s Form 8-K filed on April 25, 2017)
23		Consent of Independent Registered Public Accounting Firm (incorporated by reference to Exhibit 23 to the Company’s Form 10-K filed on September 14, 2017)


31.1^Ω		Certification of the Chief Executive Officer Required by Rule 13a-14(a) of the Securities Exchange Act of 1934, as amended, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2^Ω		Certification of the Chief Financial Officer Required by Rule 13a-14(a) of the Securities Exchange Act of 1934, as amended, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32^Ω		Certification of the Chief Executive Officer and Chief Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101.INS		XBRL Instance Document (Previously filed with the Company’s Form 10-K filed on September 14, 2017)
101.SCH		XBRL Taxonomy Extension Schema Document (Previously filed with the Company’s Form 10-K filed on September 14, 2017)
101.CAL		XBRL Taxonomy Extension Calculation Linkbase Document (Previously filed with the Company’s Form 10-K filed on September 14, 2017)
101.LAB		XBRL Taxonomy Extension Label Linkbase Document (Previously filed with the Company’s Form 10-K filed on September 14, 2017)
101.PRE		XBRL Taxonomy Extension Presentation Linkbase Document (Previously filed with the Company’s Form 10-K filed on September 14, 2017)
101.DEF		XBRL Extension Definition Linkbase Document (Previously filed with the Company’s Form 10-K filed on September 14, 2017)

———————


^Ω		Filed herewith.
∆		Portions of this exhibit indicated in the body of the exhibit by “####” have been omitted pursuant to the Company’s request for confidential treatment under Rule 24b-2 of the Securities Exchange Act of 1934, as amended, and the omitted material has been separately filed with the Securities and Exchange Commission
*		Denotes management contract or compensatory arrangement.


^Ω		Filed herewith.
∆		Portions of this exhibit indicated in the body of the exhibit by “####” have been omitted pursuant to the Company’s request for confidential treatment under Rule 24b-2 of the Securities Exchange Act of 1934, as amended, and the omitted material has been separately filed with the Securities and Exchange Commission
*		Denotes management contract or compensatory arrangement.


^Ω		Filed herewith.
∆		Portions of this exhibit indicated in the body of the exhibit by “####” have been omitted pursuant to the Company’s request for confidential treatment under Rule 24b-2 of the Securities Exchange Act of 1934, as amended, and the omitted material has been separately filed with the Securities and Exchange Commission
*		Denotes management contract or compensatory arrangement.


^Ω		Filed herewith.
∆		Portions of this exhibit indicated in the body of the exhibit by “####” have been omitted pursuant to the Company’s request for confidential treatment under Rule 24b-2 of the Securities Exchange Act of 1934, as amended, and the omitted material has been separately filed with the Securities and Exchange Commission
*		Denotes management contract or compensatory arrangement.